Philips SVZ122 Setting the Clock, Follow the steps below to set your VCR’s clock. Make sure

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 14

14 Setting the Clock

Follow the steps below to set your VCR’s clock. Make sure:

●The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

1

Press the MENU button repeatedly until the INITIALIZE menu appears.

2

Press the PLAY button or the STOP button repeatedly to select SETTING CLOCK. Then, press the F.FWD button.

	SETTING CLOCK
MONTH DAY		YEAR
– –	/ – –	– – – –
HOUR MINUTE		AM/PM
– –	: – –	– –

3

While the MONTH space is flashing, press the PLAY but- ton or the STOP button repeatedly until the desired month appears. Then, press the F.FWD button.

		SETTING CLOCK
MONTH DAY			YEAR
0 3		/ – –	– – – –
HOUR MINUTE			AM/PM
– –	: – –		– –

4

While the DAY space is flashing, press the PLAY button or the STOP button repeatedly until the desired day appears. Then, press the F.FWD button.

	SETTING CLOCK
MONTH DAY			YEAR
0 3	/	0 1	– – – –
HOUR MINUTE			AM/PM
– –	: – –		– –

5

While the YEAR space is flashing, press the PLAY button or the STOP button repeatedly until the desired year appears. Press the F.FWD button. The day of the week will appear automatically.

	SETTING CLOCK
MONTH DAY		YEAR
0 3	/ 0 1	1 9 9 8
HOUR MINUTE		AM/PM
– –	: – –	– –

POWER VCR/TV EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

		0	+100
	SPEED	RENTAL	AUTO	CLOCK/
1		SELECTOR REPEAT		COUNTER
	MENU	DISPLAY	EXIT	COUNTER
			RESET	MEMORY
	REWIND	/ PLAY		F.FWD
	RECORD		/ STOP	PAUSE/STILL

2-5

Helpful Hints

•To reset the clock, follow steps 1 -

2 above. Select the information you want to change using the F.FWD button or the REWIND button. When the desired information is flashing, use the PLAY button or the STOP button to enter the correct information. Press the COUNTER RESET/EXIT button to exit.

•To display the time, press the DIS- PLAY button repeatedly until the time appears on-screen.

•Power failures that last for more than one minute can cause you to lose your clock setting.

•Press the REWIND button to go back one step from the current step during steps 4 - 8.