20 EN
123
4
0
6
78
5
9
1
4
3
2
OK
NUMBER

SHOWVIEW

12345678

[0 – 9] =
[CANCEL] : DELETE
[PROG] : EXIT
ACCESS SHOWVIEW
SCREEN
1
Press PROG..

ENTER SHOWVIEW

NUMBER
2
Press the NUMBER keys to
enter the SHOWVIEW
number of a programme
you wish to record.
●If you make a mistake,
press CANCEL and input
the correct number.
ACCESS SHOWVIEW

PROGRAM SCREEN

3
Press OK, and the
SHOWVIEW Program screen
appears (if you’re just
starting out, “P1” appears).

IMPORTANT

Make sure the channel position number you wish
to record is displayed; if not, see "SHOWVIEW Setup"
on page 18 and set the Guide Program number for
that SHOWVIEW number correctly.
●If the number you entered is invalid, "ERROR" appears
on the screen. Press CANCEL and input a valid
SHOWVIEW number.
●If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 21.
SET TAPE SPEED
4
Press SP/LP/EP ( ) to set the tape speed.
– P1 –
SHOWVIEW 123456789
START STOP
21:00 =22:00
SP
DATE TV PROG
25.12 1
: OK
SHOWVIEWTimerProgramming
Before performing SHOWVIEW Timer Programming:
●Be sure to read "SHOWVIEW Setup" (Z pg. 18).
●Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●Turn on the TV and select the VIDEO channel (or AV mode).
With SHOWVIEW, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
TIMER RECORDING (cont.)

SHOWVIEW

[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
CANCEL
PROG.
SP/LP/EP