JVC HR-J255SA Access Channel List, EN Tuner SET, Delete a Channel, Swap Channel Positions

32ENTUNERSET(cont.)

Delete A Channel

		ACCESS TUNER SET
1		SCREEN
		Perform steps 1 – 3 of "Auto Channel Set" on page 30.
2		ACCESS CHANNEL LIST
		Press PUSH JOG %Þ to place the pointer next to "CH
	EDIT", then press OK or PUSH JOGÞ.
3		SELECT CHANNEL
		Press PUSH JOG %Þto	CH	FRQ	SYS	CH FRQ		SYS
	until the channel you want		01	150	I	07	229	I
	to delete begins blinking.		02	165	I	08	237	I
			03	195	I	09	355	I
			04	205	I	10	365	I
			05	213	I	11	374	I
			06	221	I	12	384	I
			[5/°] = [CANCEL] : DELETE
			[5/°] =		: EDIT
			[MENU] : EXIT
4		DELETE CHANNEL
		Press CANCEL.	CH	FRQ	SYS	CH FRQ		SYS
			01	– – – – –		07	229	I
		● To re-store it, simply
			02	165	I	08	237	I
		press%.	03	195	I	09	355	I
			04	205	I	10	365	I
		● Repeat steps 3 – 4 as	05	213	I	11	374	I
		necessary.	06	221	I	12	384	I
			[5/°] = [5] : ADD
			[MENU] : EXIT
		RETURN TO NORMAL
5		SCREEN
		Press MENU.

Swap Channel Positions

Example:To swap CH03 and CH09.

	ACCESS TUNER SET
1	SCREEN
	Perform steps 1 – 3 of "Auto Channel Set" on page 30.
2	ACCESS CHANNEL LIST
	Press PUSH JOG %Þto place the pointer next to "CH
	EDIT", then press OK or PUSH JOGÞ.
3	SELECT POSITION (e.g. 03)
	Press PUSH JOG %Þuntil	CH FRQ SYS			CH FRQ SYS
	the section of CH "03"	01	150	I	07	229	I
	begins blinking, then press	02	165	I	08	237	I
		03	195	I	09	355	I
	OK or PUSH JOGÞ.	04	205	I	10	365	I
		05	213	I	11	374	I
	● Only "03" will blink.	06	221	I	12	384	I
		[0 – 9]: INPUT CH
			: FINE TUNING
		[MENU] : EXIT
4	SELECT POSITION (e.g. 09)
	Press NUMBER keys to	CH FRQ SYS			CH FRQ SYS
	input "0" and "9".	01	150	I	07	229	I
		02	165	I	08	237	I
	● The two selected	03	355	I	09	195	I
	channels will be	04	205	I	10	365	I
		05	213	I	11	374	I
	swapped.	06	221	I	12	384	I
		[5	]: CANCEL
	● To cancel the channel		: OK
	swapping, press PUSH	[MENU] : EXIT
	JOG%.
5	STORE NEW POSITIONS
	Press OK or PUSH JOGÞ.
	● Repeat steps 3 – 5 as necessary.
	RETURN TO NORMAL
6	SCREEN
	Press MENU.