JVC HR-J255SA Express Timer Programming, Enter Programme Stop Time, Enter Programme Date

22ENTIMERRECORDING(cont.)

Express Timer Programming

Remember, the clock must be set before you can programme the timer (☞ pg. 9).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button.(☞ pg. 28)

1

2

ACCESS SHOWVIEW SCREEN

Press PROG..

ACCESS PROGRAMME SCREEN

Press START +/–. (If you’re	– P1 –
just starting out, “P1”		STOP
	START
appears.)	–:– – =	–:– –
		SP
	DATE	TV PROG
	– –.– –	– –
	[+/–] =
	[PROG] : EXIT

ENTER PROGRAMME START TIME

COLOUR SYSTEM

3

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30- minute increments, or press and release repeatedly to move 1 minute at a time.

START	– P1 –	STOP
	=
21:00		–:– –
		SP
DATE		TV PROG
– –.– –		– –
[+/–] =
[PROG] : EXIT

ROG
.
1
1	2	3
4	5	6
7	8	9
SP/LP/EP	0	4
2
START+/–		TV PROG+/–
–		DATE+/
STOP+/		–
3

4

5

6

7

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

Press DATE +/–. (The current date appears on screen. The date you enter appears in its place.)

ENTER CHANNEL
POSITION
Press TV PROG +/–.	– P1 –
START	STOP
21:00	= 22:00
	SP
DATE	TV PROG
25.12	1
[+/–] =
[PROG] : EXIT

SET TAPE SPEED

Press SP/LP/EP () to set the tape speed.