Dixon 130211 - DCKC, 130212 - DCRC manual Front Weights Kodiak

ASSEMBLY

FRONT WEIGHTS - KODIAK

1.Remove mower foot plate and floor pan.

2.Align weight bar to the front of the frame. See diagram.

3.Secure weight bar to mower frame with four 5/16-18 x 1 1/4” hex bolts from kit, reuse the four 5-16” washers and four 5/16” nyloc nuts that were removed from the foot plate.

4.Place all front weights on front weight bar.

5.Place holddown bar over front weights and secure to front weight bar using two 3/8” x 1” clevis pins and two hair pins.

6.Reinstall floor pan.

	WEIGHT BAR HOLD DOWN
FRONT WEIGHT BAR	CAST COUNTERWEIGHT

12