ASSEMBLY
10.Lift Clamshell assembly onto (539 114781) Mount Bracket, Lower. Position tubes on bottom of clamshell on out side of the tubes on (539 114781) Mount Bracket, Lower.
11.Secure with (539 119372) Hinge Pin and (539 115501) Cotter Pin.
12.Hook both (539 114783) Linkage, Support into (539 114786) Plate, Support, Linkage and secure with two remaining (539 115501) Cotter Pins.
13.Tighten (539 100476) 5/8 Jam nut and (539 115591) 5/8 Nyloc nut so that the clamshell is sitting straight on unit.
14.Tighten (539 114782) Brackets on front of clamshell.
539 114782 |
BRACKET |
CLAMSHELL |
ASSEMBLY |
539 114812 LINKAGE, |
SUPPORT |
FIGURE 3
8