| SPECIFICATIONS | |
|
| Models ZTR 4423 |
CHASSIS: | Twin 12 gauge side frames and 7 gauge transmission and engine base plate. | |
BODY: | All body parts are made of high density polyethylene. Dent and corrosion | |
| resistant. Front body contains access panel for battery service. | |
MOWER DECK: | 13 GA stamped steel construction. | |
| (3) blades combine for a 42" cut width. | |
| Cut height approximately 1" to 4" via 7 position lift handle. | |
BLADE DRIVE: | Electric clutch. | |
TRANSMISSION: | Each rear wheel is independently driven by chain and sprockets through a | |
| mechanical friction drive. | |
ENGINE: | 15.5HP Vanguard Briggs & Stratton, | |
| Valve, | |
| Pressure Lubricated with oil filter. | |
STARTING SYSTEM: | Electric by key switch operation with safety interlock blade drive. | |
TIRES: | Front | 11 X 4.00 X 5 ribbed tread. |
| Rear | 18 X 9.50 X 8 Turf Trac RS |
RECOMMENDED |
|
|
TIRE PRESSURE: | Front | |
| Rear | |
CAPACITIES: | Fuel | 2.7 gallons total. |
| Engine | 1.50 quarts oil. |
DIMENSIONS: | Width | 47" outside rear wheel measurement. |
| Height | 42" to top edge of seat. |
| Length | 72" hitch tab to front bumper. |
| Weight | 520 lbs. |
NOTE: | Additional information provided in service instructions under the individual | |
| component. | |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 11