ASSEMBLY
BELT COVERS
1.Place the deck belt shield on the deck over the drive pulley and secure with hardware removed from steel belt shield.
2.Place retainer on the outer pulley cover.
3. | Align the tab end of the belt cover into the slot on | Knob | |
| the deck belt shield and the other end over the end |
| |
| of the outer pulley cover. | Middle Chute Latch | |
4. | Secure with knob. | ||
| |||
| Belt Cover Tab |
| |
|
| Retainer | |
| Deck Belt Shield |
|
Outer Pulley Cover
MIDDLE CHUTE
1.Place middle chute over the top end of the blower assembly.
2.Latch middle chute to blower assembly.
MIDDLE CHUTE
BLOWER ASSEMBLY
12 - Husqvarna