Operation, Tips for Improved Bagging | Dixon 966 004901 instruction

OPERATION

TIPS FOR IMPROVED BAGGING

Follow the mower operation instructions in the mower operator’s manual.

When utilizing the grass catcher on a lawn where grass and leaf bagging equipment has not been used, thatch and debris that has accumulated for long periods of time will be picked up. The amount collected and the total time of operation may be greater than experienced with regular use of the grass catcher.

•Always run throttle at full speed when bagging.

•Select a speed low enough to give good mower cutting performance, good quality cut and good bagging performance.

NOTE: It may be necessary to overlap width of cut to suit your conditions.

•If grass is extremely tall, it should be mowed twice. The first time relatively high, the second time to desired height.

•Use left hand side of mower for trimming.

•Plastic trash bags (3.0 mil, 30 gallon) can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full:

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

b.Unlatch and raise cover.

c.Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails.

d.With the container resting on the ground, close and secure the top of the plastic lawn bag.

e.Tip the container on its side and slide the filled bag from the container.

f.Install a new plastic lawn bag with the edges of the bag draped over upper lip of the container.

g.Repeat for other container.

h.Reinstall containers making sure right container overlaps left container at center supports.

i.Close cover and secure latches over center support tubes.

•Avoid cutting wet grass or mowing in the morning while the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and adhere to the walls of the flow path causing clogging.

•If the grass catcher fails to pick up cut grass or leaves, it is an indication that clogging has occurred in the system or that the grass catcher containers are full.

a.Disengage blades, place motion control levers in neutral position.

-Unlatch and raise cover.

-Slide out containers and dispose of clippings.

-Replace containers, close cover, and latch.

b.Unlatch chutes and check for clogging.

-Remove all debris in chute.

-Reassemble and latch chutes.

WARNING!

•DO NOT operate mower with

grass catcher partially installed.

•Disengage blades and stop engine before leaving mower seat to empty containers, unclogging chutes, etc.

•Close cover before starting.

•Disengage mower blades when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

•DO NOT attempt to vacuum up cans or other potentially hazardous projectiles.

16 - Husqvarna

966 004901 specifications

The Dixon 966 004901 is a highly regarded product in the world of industrial hoses and fittings, known for its durability and performance in demanding environments. Designed primarily for the transfer of fluids, the Dixon 966 004901 features a robust build that ensures reliability under high-pressure conditions, making it ideal for various applications across industries such as construction, manufacturing, and agriculture.

One of the standout characteristics of the Dixon 966 004901 is its construction material. Typically made from high-quality rubber or thermoplastic, the hose is engineered to withstand extreme temperatures and harsh chemicals. This resilience allows it to maintain its structural integrity even when exposed to corrosive substances, which is a significant advantage for users handling hazardous materials.

The hose exhibits excellent flexibility, allowing for easy maneuverability and installation in tight spaces. This attribute is crucial for operations where accessibility may be limited. The design also incorporates a smooth inner lining, which minimizes friction and turbulence during fluid transfer, thus enhancing flow efficiency and reducing wear over time.

The Dixon 966 004901 is equipped with advanced coupling technologies that ensure a secure connection to other fittings and hoses. The use of crimped or threaded ends provides leak-proof performance, which is vital for preventing fluid loss and maintaining operational safety. Depending on the specific configuration, the hose can be customized with various fittings to suit different industrial needs.

Another notable feature is its lightweight design, which contrasts with many traditional hoses that can be cumbersome. This lightweight nature does not compromise strength, allowing users to handle the hose with ease without sacrificing performance.

In terms of safety, the Dixon 966 004901 incorporates features that comply with international safety standards. The hose is rigorously tested to ensure it meets stringent quality control measures before it reaches the market, giving users peace of mind when using it in potentially hazardous situations.

Overall, the Dixon 966 004901 represents a perfect blend of durability, flexibility, and safety, making it a preferred choice for professionals looking for a reliable hose solution across various sectors. Its capabilities to withstand harsh conditions and its ease of use set it apart in a competitive marketplace.