ASSEMBLY
BAGGER ASSEMBLY
1.Attach hitch tube to support bracket with
2. Place the support bracket against the frame rear guard. Using the outer right hole and inner left hole, secure with 5/16 x 1 bolts and 5/16 nyloc nuts.
3. Attach support tube to frame hitch with ½ x 2¼ bolt and ½ nyloc nut.
SUPPORT BRACKET
HITCH TUBE
SUPPORT BRACKET
HOLES
4.Place the hood / hitch assembly onto the hitch tube.
5.Open the hood and secure the (2) springs to the bolts on the hood assembly and the hitch assembly.
ATTACH HITCH TUBE TO FRAME
ATTACH SPRINGS TO HITCH AND HOOD
SET HOOD/LATCH ASSEMBLY ONTO HITCH TUBE
8 - Husqvarna