Dixon 14295-0804 Table Of Contents, Safety & Warning, Controls, 18-22, 23-33, Care & Maintenance

Page 3

TABLE OF CONTENTS

 

Page

SAFETY & WARNING

4-15

WARRANTY

16

SPECIFICATIONS

17

CONTROLS

18-22

OPERATION INSTRUCTIONS

23-33

CARE & MAINTENANCE

34-45

TROUBLESHOOTING

46-47

STANDARD SERVICE PARTS LIST

48

ZEETER™

Part Number 14295-0804

3

Image 3
Contents ZEETER Safety Instructions & Operator’s ManualIMPORTANT - READ CAREFULLY TROUBLESHOOTING TABLE OF CONTENTSSAFETY & WARNING CARE & MAINTENANCEBlade Contact Tip Over Run Over Back Over SAFETYsafe operating practices Safety Alert SymbolWhen you see this symbol, BE ALERT to the potential for injury Follow the recommended safety precautions andGENERAL OPERATION GENERAL OPERATION continued Maintain or replace safety & instruction labels as needed SLOPE OPERATION SLOPE OPERATION continued Do not mow on wet grass. Reduced traction could cause sliding FIRE HAZARDS FIRE HAZARDS continued CHILDREN SERVICE DIXON ZTR RESIDENTIAL WARRANTY POLICY ZEETER - Residential MowerSPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SPECIFICATIONSCONTROL LEVERS CONTROLSTO SET PARKING BRAKE PARKING BRAKE3. Check engine oil 4. Check fuel cap to be sure it is in place 1. Read engine manufacturer’s operating and maintenance instructions7. Know how to stop engine. Turn key to off position BEFORE OPERATING MOWERTOWING TRAILERS AND OTHER ATTACHMENTS TRANSMISSION DRIVE SYSTEMBLADE DRIVE THROTTLE CONTROL LEVERMOWER DECK CUT HEIGHT LIFT LEVER OPERATION INSTRUCTIONS STARTING INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMS MOWING WITH A MULCHING ATTACHMENT MOWING WITH A MULCHING ATTACHMENT continued MOWING WITH A GRASS CATCHER ATTACHMENT MOWING WITH A GRASS CATCHER ATTACHMENT continued Failure to observe the following instructionsWARNING may result in personal injury 5. Maintain sharp blades throughout the cutting season SIDE DISCHARGE OF THE CLIPPINGSGRASS HEIGHT & CUTTING SUGGESTIONS allow to cool & remove key Use extreme care when working on machinery CARE AND MAINTENANCEMAINTENANCE SCHEDULE Before performing any maintenance, turn off engineCUTTER BLADE MAINTENANCE ENGINE BATTERYLUBRICATION Engine to Transmission Belt - P/N TIRESBELTS BELT TENSIONELECTRICAL SYSTEMS CLEANING THE MOWERWARRANTY PARTS/SERVICECHANGING THE ENGINE OIL OIL FILL MOWER DECK LEVELING PROCEDURE Illustration A IllustrationB REAR CHAIN ADJUSTMENT MaintenanceDO NOT OVERTIGHTEN CHAIN DECK REMOVAL DRIVE SYSTEM ADJUSTMENTS STANDARD SERVICE PARTS LIST BLADESENGINE AIR AND OIL FILTERS 3. HARD TO START ENGINE TROUBLESHOOTING1. ENGINE WON’T TURN OVER 2. ENGINE WILL TURN OVER BUT WON’T START9. DRIVE SYSTEM 7. MOWER LOSES POWER OR TRANSMISSION OVERHEATS8. ENGINE STALLS WHEN BLADES ARE ENGAGED 6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARDPage Page Page DATE ENGINE TUNED OWNER’S INFORMATIONName Address DATE OIL CHANGEDDixon and ZTR are registered trademarks of Dixon Industries, Inc ZEETERcancer, birth defects or other reproductive harm