Operation, Lighting Instructions | Desa 28BN instruction

ASSEMBLY OPERATION

ASSEMBLY

Continued

11.Place the cylinder inside the base with the regulator to the front of base assembly. Make sure the bottom collar of the cylinder is in front of the tab in the base (see Figure 11).

12.Verify valve on heater is in OFF position.

13.Turn cylinder supply valve fully counterclockwise to the OPEN position.

14.Use a soapy water solution to check all connections for leaks before attempting to light heater. If leak is found, turn cylinder valve to CLOSE and do not use until all leaks are corrected.

15.Turn cylinder supply valve fully clockwise to CLOSE position.

16.Plug ignitor wire back into piezo ignitor and replace control cover (see Figure 7, page 5).

17.Install knob onto gas valve stem aligning “d-flat” (see Figure 13).

18.Install shoulder screw, provided, into center hole at bottom of back plate (see Figure13).

19.Place cylinder cover over this screw while inserting tab in base (see Figure 13).

Slide Over

Shoulder Screw Cylinder

Cover

Ventilation	Shoulder
Openings	Shoulder
	Screw

20 lb.

Propane/LP

Cylinder

Tab in

Base

Figure 11 - Installing Propane/LP Cylinder

Intake Air Opening

Gas Valve

Stem

	Intake Air
	Openings on	Gas Valve
	Both Sides of	Gas Valve
	Both Sides of	Knob
	Cover	Knob
	Cover

Piezo Ignitor

Figure 12 - Installing Gas Valve Knob

Tab

Figure 13 - Installing Cylinder Cover

OPERATION

LIGHTING INSTRUCTIONS

1.Remove cylinder cover by lifting up and out.

2.Using only a 20 lb. propane/LP cylinder, not included (see safety information for proper cylinder selection), connect the hose/regulator assembly to the cylinder (see Figure 10, page 5). The hose should already be connected to the heater. When connecting regulator assembly to cylinder valve, hand tighten nut clockwise to a positive stop. DO NOT use a wrench to tighten. Use of a wrench may damage quick closing coupling nuts and result in a hazardous condition.

3.Place the cylinder inside the base with the regulator to front of base assembly. Make sure the bottom collar of the cylinder is in front of the tab in the base (see Figure 11).

4.Turn heater valve to OFF position.

5.Turn cylinder supply valve fully counter clockwise to OPEN position.

6.Use a soapy water solution to check the connection. For leaks before attempting to light heater. If leak is found, turn cylinder valve to CLOSE and do not use until all leaks are corrected.

7.Replace cylinder cover by sliding cover over shoulder screw while inserting tab in base (see Figure 13).

8.Push knob in and turn counter clockwise to the PILOT position.

For..com

107396

28BN specifications

Desa 28BN is an innovative residential community that redefines modern living with its unique blend of cutting-edge technology and sustainable design. Located in a serene environment, this community is designed to foster a sense of belonging while offering state-of-the-art amenities and features that cater to the needs of its residents.

One of the primary features of Desa 28BN is its commitment to sustainability. The community is built with eco-friendly materials and design principles that minimize environmental impact. Green roofs, rainwater harvesting systems, and solar panels are integrated into the architecture, ensuring that the community remains energy-efficient and environmentally friendly. This conscious approach to construction not only reduces the carbon footprint but also promotes a healthier living environment.

In terms of technology, Desa 28BN is equipped with smart home automation systems that enhance the living experience. Residents can control lighting, heating, and security systems through their smartphones, allowing for convenience and peace of mind. The community is also equipped with high-speed internet connectivity, enabling residents to stay connected and work remotely with ease.

Desa 28BN places a strong emphasis on community engagement and social interaction. The layout of the neighborhood encourages walkability, with pedestrian-friendly pathways, parks, and communal spaces designed for gatherings and recreational activities. This fosters a sense of unity among residents, creating a vibrant and welcoming atmosphere.

Security is a top priority in Desa 28BN. The community features 24/7 surveillance systems, gated access, and trained security personnel to ensure the safety of all residents. This focus on security allows families to feel safe and comfortable within their homes and the surrounding environment.

Additionally, the community offers a range of amenities including fitness centers, swimming pools, and children’s play areas. These facilities encourage an active lifestyle and provide opportunities for social interactions among residents.

In conclusion, Desa 28BN represents a forward-thinking approach to residential living, blending sustainability, technology, and community engagement. Its thoughtful design and commitment to resident well-being make it an exemplary model of modern housing, catering to the aspirations of today’s families while keeping the future in mind.