Desa 076728K, 100089-01, 076702J Sharpening SAW Chain, Non-Fast Sharp Model Sharpening Cutters

Page 13

OWNER’S MANUAL

CLEANING AND MAINTENANCE

Continued

SHARPENING SAW CHAIN

(Non-Fast Sharp Model)

WARNING: Unplug chain saw from power source before servic- ing. Severe injury or death could occur from electrical shock or body contact with moving chain.

Sharpening Cutters

Use file guide for 30 ° filing.

1.Adjust chain for proper tension (see Saw Chain Tension Adjustment, page 7).

2.Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.

3.Press 5/32" round file (attached to file guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figures 20 and 21). Note: File at midpoint of guide bar.

4.Hold file guide level. Make sure 30 ° mark on file guide is parallel to center

of guide bar (see Figure 20). This will insure that you file cutters at 30 ° angle.

5.File from inside towards outside of cut- ter until sharp. Only file in this one direc- tion (see Figure 20). Note: Two or three strokes with file should sharpen cutter.

6.After each cutter is sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain.

7.Move to other side of chain and repeat process.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

Keep chain sharp. Your saw will cut faster and more safely. A dull chain will cause undue sprocket, guide bar, chain, and motor wear. If you must force chain into wood and cutting creates only sawdust with few large chips, chain is dull.

Items Needed to Sharpen Chain

Purchase these items from your local dealer, hardware store, or chain saw supplies outlet.

5/32" round file

Depth gauge tool

File guide

Vise

30° Guide Mark

Filing

Direction

File

Guide

5/32" Round File

Note: This illustration shows file guide placement and filing direction for sharpen- ing cutters on left side of chain.

• Medium sized flat file

Figure 20 - File and File Guide Placement On Chain

 

Groove

 

Depth Gauge

 

(left side of chain)

Depth Gauge

Left Side of

(right side

Chain

of chain)

Groove

 

Top Plate

Top Plate

(right side of chain)

(left side of chain)

 

Right Side of

 

Chain

 

Figure 21 - Chain Part Locations

Continued

105419

13

Image 13
Contents Electric Chain SAW Before Operating SAW SafetyWhile Operating SAW Kickback Safety Devices On This Saw Maintenance and Storage of Chain SAWSaw Maintenance and Kickback Safety KickbackChain SAW Names and Terms Unpacking ProductSee Saw Chain Tension Adjustment, AssemblyInstalling Automatic Chain Sharpener SAW Chain Tension AdjustmentFilling OIL Tank Fast Sharp Models OnlyExtension Cords Operating Chain SAWOiling Chain Cutting with the Chain SAWFelling a Tree Felling Procedure Felling NotchCutting Down a Tree Before Felling a TreeBucking a LOG Limbing a TreeEntire Length Of Log On Ground Log Supported On One EndLog Supported On Both Ends Trimming a Tree PruningCleaning SAW Body Cleaning and MaintenanceNormal Guide Bar Maintenance Care of Guide BARNon-Fast Sharp Model Sharpening Cutters Sharpening SAW ChainItems Needed to Sharpen Chain Filing Cutter Depth Gauges Replacing SAW ChainFast Sharp Model Technical Service TroubleshootingService Publications StorageParts Centrals Authorized Service CentersIowa IA IndianaKansas KS Maine MENorth Dakota ND NEW York NYOhio OH Oklahoma OK077155 Adjusting Plate Assy Replacement Parts and Accessories097570-01S Guide bar 091374S Chain 075752 Drive sprocket 079963-02Warranty Service NON-WARRANTY Service Repair Service

100015, 075762J, 104316-04, 076702J, 076728K specifications

Desa 100089-01, 076728K, 100015, and 076702J, along with the model 104316-04, represent a significant advance in modern technology and design, showcasing innovative features suited for various applications. These models are part of a wider effort to integrate efficiency and performance in consumer products.

Starting with the Desa 100089-01, it stands out for its robust construction and user-friendly interface. This model is engineered with high-grade materials that enhance durability while ensuring a lightweight design, resulting in easy portability without compromising strength. The intuitive controls allow users to operate the device seamlessly, making it ideal for both novice and experienced users.

The 076728K model features advanced connectivity options, supporting both wired and wireless connections. This adaptability makes it versatile for integration into various environments, whether in the home or office. Moreover, it includes smart technology that allows users to monitor and control settings remotely through a dedicated app, thereby enhancing convenience and efficiency.

The 100015 model takes a unique approach to energy consumption. It is equipped with state-of-the-art energy-saving technology that minimizes power usage while maintaining high performance. This feature is particularly beneficial in reducing overall operational costs and promoting sustainability.

The 076702J incorporates cutting-edge safety features, ensuring that users can operate it without worries. With multiple fail-safes and automatic shut-off features, user safety is greatly prioritized. Additionally, this model is designed to operate quietly, making it an excellent choice for environments where noise reduction is essential.

Finally, the 104316-04 model excels in versatility. Its design caters to multiple functionalities, making it suitable for a range of tasks. The adaptability of this model allows users to switch between different modes quickly, enhancing productivity whether in a workspace or a recreational setting.

Overall, these models—Desa 100089-01, 076728K, 100015, 076702J, and 104316-04—showcase a commitment to quality and performance. With advanced features, innovative technologies, and a focus on user experience, they are well-equipped to meet the needs of today's consumers. Each model brings unique characteristics to the table, ensuring that there’s a suitable option for a diverse array of applications.