Safety, Before Operating SAW, While Operating SAW

ELECTRIC CHAIN SAW

SAFETY

WARNINGS

Make certain you read and un- derstand all Safety Warnings on pages 2 and 3. Improper use of this chain saw can cause severe injury or death from ﬁre, electri- cal shock, body contact with moving chain, or falling wood.

BEFORE OPERATING SAW

1.Read and understand this owner’s manual before operating chain saw.

2.Watch what you are doing. Use com- mon sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plas- tic, masonry, etc.

4.Only well-instructed adults should op- erate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See page 8 for extension cord requirements.

7.Do not operate chain saw

•while under the inﬂuence of alcohol, medication, or drugs

•in rain or in damp or wet areas

•where highly ﬂammable liquids or gases are present

•if saw is damaged, adjusted wrong, or not fully and securely assembled

•if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized service center.

•while in a hurry

•while in tree or on a ladder unless trained to do so

8.Wear snug-ﬁtting clothes when oper- ating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

•heavy-duty gloves (wear rubber gloves when working outdoors)

•steel-toed safety footwear with non- skid soles

•eye protection such as safety glasses, goggles, or face screen

•safety hard hat

•ear mufﬂers or ear plugs

•hair covering to contain long hair

•face or dust mask (if working in dusty areas)

10.Before cutting, always provide the fol- lowing:

•clear work area

•secure footing

•planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite injuries.

3.Be aware of extension cord while op- erating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystand- ers away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform buck- ing and felling operations at the same time, provide plenty of distance be- tween operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw ﬁrmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep ﬁnger off trigger until ready to make cut.

10.Before starting chain saw, make sure chain is not touching anything.

11.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

12.Keep all parts of body away from chain when saw is running.

13.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

14.Cut small brush and saplings with ex- treme care. Slender material may catch in chain and be whipped toward you. This could also pull you off balance.

15.When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator caus- ing severe injury or death.

16.Carry chain saw from one place to an- other

•with saw stopped and unplugged

•by holding front handle (never use hand guard as handle)

•with ﬁnger off trigger

•with guide bar and chain to rear

105419

100015, 075762J, 104316-04, 076702J, 076728K specifications

Desa 100089-01, 076728K, 100015, and 076702J, along with the model 104316-04, represent a significant advance in modern technology and design, showcasing innovative features suited for various applications. These models are part of a wider effort to integrate efficiency and performance in consumer products.

Starting with the Desa 100089-01, it stands out for its robust construction and user-friendly interface. This model is engineered with high-grade materials that enhance durability while ensuring a lightweight design, resulting in easy portability without compromising strength. The intuitive controls allow users to operate the device seamlessly, making it ideal for both novice and experienced users.

The 076728K model features advanced connectivity options, supporting both wired and wireless connections. This adaptability makes it versatile for integration into various environments, whether in the home or office. Moreover, it includes smart technology that allows users to monitor and control settings remotely through a dedicated app, thereby enhancing convenience and efficiency.

The 100015 model takes a unique approach to energy consumption. It is equipped with state-of-the-art energy-saving technology that minimizes power usage while maintaining high performance. This feature is particularly beneficial in reducing overall operational costs and promoting sustainability.

The 076702J incorporates cutting-edge safety features, ensuring that users can operate it without worries. With multiple fail-safes and automatic shut-off features, user safety is greatly prioritized. Additionally, this model is designed to operate quietly, making it an excellent choice for environments where noise reduction is essential.

Finally, the 104316-04 model excels in versatility. Its design caters to multiple functionalities, making it suitable for a range of tasks. The adaptability of this model allows users to switch between different modes quickly, enhancing productivity whether in a workspace or a recreational setting.

Overall, these models—Desa 100089-01, 076728K, 100015, 076702J, and 104316-04—showcase a commitment to quality and performance. With advanced features, innovative technologies, and a focus on user experience, they are well-equipped to meet the needs of today's consumers. Each model brings unique characteristics to the table, ensuring that there’s a suitable option for a diverse array of applications.