Country Home Products 6-TON Tools and Parts Supplied, Additional Tool Required

Page 15

Unpacking and Assembling the DR 6 -TON ELECTRIC WOOD SPLITTER

NOTE: Read this Safety & Operating Instructions Manual before using your new DR 6 -TON ELECTRIC WOOD SPLITTER. The wood splitter shipped from the factory fully assembled with the exception of the Wheels and the Operation Handle. The following instructions will detail how to unpack and assemble the machine.

Tools and Parts Supplied:

•6mm Hex Wrench

•10 - 12mm Wrench

•13 - 16mm Wrench

•Operating Handle w/ Retaining Bolt and Washer

•(2) 6mm Bolts

•Extra Hydraulic Seal

•(2) Wheels

Additional Tool Required:

•Knife

STABILIZE THE SHIPPING CONTAINER ON A FLAT SURFACE BEFORE ATTEMPTING TO UNPACK AND ASSEMBLE THE MACHINE.

1.With the help of another person (the machine weighs 171 pounds), carefully roll the shipping carton over onto its top.

2.Carefully cut the tape along the bottom seam of the shipping carton with a knife, open the carton, and remove the Wheel from the packing; setting it aside (Figure 2).

3.Now, carefully roll the shipping carton back onto its bottom

(Figure 3) and lift the shipping carton off your new DR 6 -TON ELECTRIC WOOD SPLITTER (Figure 4). The machine should

now be resting on the Front Support Legs and the Rear Support.

Figure 2

 

Bottom of carton

Remove Wheel

4.Remove the second Wheel from the packing (setting it aside) and any remaining packing materials from the machine. Do not discard your packaging material until you are fully satisfied with your new DR 6 -TON ELECTRIC WOOD SPLITTER.

Remove Wheel

Figure 4

Figure 3

Top of carton

Lift carton up

CALL TOLL FREE 1-800-DR-OWNER

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Meigs Road Vergennes, VT Toll-free phone 1-800-DR-OWNER Fax Table of Contents Iv DR WDS 6.4, 6 -TON Electric Wood Splitter Conventions used in this manual Introducing the DR 6 -TON Electric Wood Splitter12,000 lbf Specifications for the DR 6 -TON Electric Wood SplitterLabels General Safety RulesOperating the Wood Splitter Safely Protecting Yourself and Those Around YouSafety for Children Safety with Electric-Powered Machines Hydraulic Safety Additional Information and Potential Changes DR-OWNER Controls Label DR 6 -TON Electric Wood Splitter Controls and FeaturesAdditional Tool Required Tools and Parts SuppliedFlat surface facing forward Inspect the area in which you will be working Operating Your DR 6 -TON Electric Wood SplitterBefore Starting the Electric Motor Tools NeededDipstick and Hydraulic Fluid Port Handle Logs only from the SIDES, Never by the Ends Splitting SafetyOperating the DR 6 -TON Electric Wood Splitter Activate the Ram to push the Wedge under How to Free a Jammed Log from the WedgeDR WDS 6.4, 6 -TON Electric Wood Splitter Regular Maintenance Checklist before each use Maintaining the DR 6 -TON Electric Wood SplitterBefore each season Adjusting the Hydraulic Fluid Level Sharpening the WedgeTool Needed End of Season and Storage Electrical ConnectionsDR WDS 6.4, 6 -TON Electric Wood Splitter Troubleshooting Table TroubleshootingHydraulic fluid leaking from the Ram or other external parts Parts List DR 6 -TON Electric Wood Splitter Parts LISTS, Schematic Diagrams and Warranty220381 Carry Handle Kit Part# Description 107 215451215501 Fan Kit 220361 Wheel KitSchematic DR 6 -TON Electric Wood Splitter Tray Optional AccessoriesDR 6 -TON Electric Wood Splitter Daily Checklist for the DR 6 -TON Electric Wood Splitter
Top Page Image Contents