Controls, Connections (front) con- tinued
|
|
|
|
|
|
|
|
| 4 |
| 5 |
| 6 | 7 | 8 |
|
|
|
|
|
| INPUT | REC LEVEL | MIC/LINE ATT | SPEAKER | OPEN/CLOSE |
| ||||
|
|
|
| MIC/LINE | ANALOG | DIGITAL | MANUAL | OFF | ON | OFF | ON |
| |||
|
|
|
|
|
| ALC | LIMITER |
|
|
|
|
|
| ||
PHONE/SPEAKER PHONE SELECTOR | MIC | L |
| R |
|
|
|
|
|
|
|
|
| ||
LEVEL | LINE OUT | LINE | INT | L/R | L + R |
|
|
|
|
|
|
|
|
|
|
| AUX | MIX OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
| MIC/LINE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PUSH |
| PUSH |
|
|
|
|
|
|
|
|
|
|
PHONES | LINE OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Recordable | CD PLAY / RECORD |
|
|
|
|
|
| ||
|
|
|
|
|
| ReWritable |
|
|
|
|
|
| |||
|
|
| LEFT | MIC/LINE | RIGHT |
|
|
|
|
|
|
|
|
|
|
SPEAKER
OFF ON
OPEN/CLOSE
7SPEAKER OFF/ON switch
Turns the
8OPEN/CLOSE switch Push and release to OPEN the CDR drive.
9 | 10 | 11 | 12 | |||||
| INPUT | 4 INPUT ANALOG/DIGITAL | ||||||
ANALOG | DIGITAL | |||||||
switch |
| |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
| Select between analog or digital | ||
|
|
|
|
|
| |||
|
|
|
|
|
| external input. Connect digital | ||
|
|
|
|
|
| |||
|
|
|
|
|
| output of the source machine to | ||
the DIGITAL IN jack on the rear of CDR300. Connect analog input to either the MIC/LINE input jacks on the front of the CDR300 and/or the AUX IN jacks on the rear of the CDR300.
REC LEVEL | 5 REC LEVEL switch | |||||
MANUAL | Record level limiter for analog | |||||
ALC |
|
| LIMITER | |||
| ||||||
|
|
|
|
|
| input during recording. |
|
|
|
|
|
| |
|
|
|
|
|
| ALC – Limits any input signal |
|
|
|
|
|
| greater than |
|
|
|
|
|
| |
|
|
|
|
|
| MIC/LINE (or INT MIC) level |
controls should be set to maximum.
MANUAL – Set level using left and right MIC/LINE (or INT MIC) level controls. When recording via AUX IN control the level using the output level control on the external device. Levels in excess of 0 dB will be recorded and will result in distorted recordings. LIMITER – Same as manual: Set level using left and right MIC/LINE (or INT MIC) level controls. Levels in excess of
Note: REC LEVEL adjustment is not available with this switch at ALC.
MIC/LINE ATT | 6 MIC/LINE ATT switch | ||||
| OFF | ON | |||
| Determines if the signal from the | ||||
|
|
|
|
| |
|
|
|
|
| MIC/LINE inputs is attenuated. |
|
|
|
|
| |
|
|
|
|
| OFF – the signal(s) is not attenu- |
|
|
|
|
| |
|
|
|
|
| ated. |
|
|
|
|
| ON – The signal is attenuated |
approximately 20 dB to prevent distortion. | |||||
CDR drive open
To CLOSE the CDR drive, push and release the OPEN/CLOSE switch.
PHONES 9 PHONES jack
Plug stereo headphones in here.
Adjust headphone volume with the
PHONES/SPEAKER LEVEL control.
LINE OUT 10 LINE OUT level control
Turn to adjust the level of the output to the LINE OUT jacks.
11CDR drive (disc tray)
The CDR drive is used for recording and can record
12Remote control sensor
Sensor for the supplied wireless remote control.
Note: Set the REMOTE EXT. INT. switch on the back to INT. to enable the wireless remote control.
- 14 -