Single Action Programs

Operating Instructions

Single Action programs are pre-built chase and flow patterns. They can be executed either manually or by DMX control. Depending on the program the following attributes can be modified; Run Speed, Flash Frequency and Color Selection.

NUMBER

PROGRAM

Black

Red

Green

Blue

Yellow

Purple

Cyan

White

Color Change

Slow Flow 1

Slow Flow 2

Roll Chase 1

Roll Chase 2

Multi Color

Fast Flow 1

Fast Flow 2

Fast Flow 3

Fast Flow 4

2 Color Chase

2 Color Flow

Any Color

Color Fade

Auto Run

TYPE

Static

Auto

MODIFICATIONS (MODIFIER)

None

Run Speed, Flash Speed

Run Speed, Select Color Combination (1)

Run Speed, Flash Speed, Select Color Combination (1) Run Speed, Flash Speed, Select Color Combination (1) RGB Color Mix, Red, Green, Blue

Run Speed

Run Speed, (runs all built in programs)

(1) Refer to “DMX Channel Values” for Color Combinations Table.

C h o o s i n g S i n g l e Ac t i o n P r o g r a m s

1.Press the MODE button until the display shows “M System Setup”.

2.Press the UP button to arrive at “M Single Action”.

3.Press the SETUP button to enter menu function.

4.Press the UP and DOWN buttons to toggle built in programs. Press SETUP button to choose the presently viewed program number.

5.Upon selecting the program, the menu will immediately display whatever modifier may exist for that individual program selected. It can display “Flash Speed: 100” or “Run Speed: 100” for example. Pressing the SETUP button will toggle the various modifiers available for the program as listed in the table above.

6.Use the UP and DOWN buttons to adjust the values of modifiers accordingly. Remember that SETUP will toggle the various options while UP and DOWN changes the values.

7.Press the MENU button to retain the new settings..

8.Press MENU again if necessary to return to the Main Menu.

COLORmist™ System User Manual

2005-10-10/18:36