Introduction

DMX PRIMER

The Physical Medium

The Signals

DMX Universes

The Functions

The DMX protocol (USITT DMX512-A) is a networking protocol that enables a universal DMX controller device to control the features of multiple DMX compatible fixtures, whether PAR cans, wash lights, moving heads, followspots, foggers, or proprietary fixture controllers, etc.

As any other networking protocol, the USITT DMX512-A describes the physical medium, the signals, and the functions they control.

DMX compatible fixtures are connected to the DMX controller using a DMX connection. This connection consists of a series of wired connections between the DMX controller and the various DMX compatible fixtures, also known as a daisy chain connection. In this type of connection, the DATA OUT of one fixture or the DMX controller connects to the DATA IN of the next fixture, and so on.

Each DMX fixture links to the previous and next DMX fixture or controller using a DMX cable. This type of cable consists of a section of shielded, two- conductor twisted pair cable with one 3-pin or 5-pin XLR male connector on one end, and a 3-pin or 5-pin XLR female connector on the other end. The XLR connectors pin-out is as follows: pin 1 is the Common (shield), pin 2 is Signal Negative (S-), and pin 3 is Signal Positive (S+).

Note: For DMX, pins 4 and 5 are not used.

The DMX signal stream is unidirectional from the DMX controller to the DMX compatible fixtures. These signals conform to the EIA-485 standard.

The stream of DMX signals consists of 512 individual, sequential channels that form a frame. The DMX controller constantly sends frames of DMX signals to the DMX connection, even if not all of the 512 channels are in use.

Because of this constant transmission method, there can be only one DMX controller in a DMX connection. If not, the DMX signals sent by one controller would interfere with the signals sent by the other controller(s).

A DMX universe is the set of DMX compatible fixtures connected to the same DMX daisy chain using the same set of 512 DMX channels. Each set of 512 channels is referred to as a DMX Universe.

In most cases, an installation will consist of only one DMX universe. However, you might find it necessary to define two or more universes because of constrains imposed by distance or the number of features.

Most DMX controllers support only one universe, although some DMX controllers may support two or more universes. Each universe will have its own separated DMX daisy chain. A DMX compatible fixture can only be part of a single DMX universe.

Each DMX channel can have any unitary value in the 000~255 range. Each DMX compatible fixture uses as many consecutive DMX channels as features the user can control. The sequential numbers assigned to each DMX channel (1~512) are also known as DMX addresses.

The function each DMX channel has, and the results of assigning a value to each depend on the personality (or DMX channel layout) of each controlled fixture. Some fixtures only use a single DMX channel, while others may require 15 or more DMX channels to control all their functions. Personalities are discussed in the next section, DMX Configuration.

Impulse™ 648 User Manual Rev. 6

Page 17 of 21

648 specifications

The Chauvet 648 is an advanced LED wash light designed for a variety of performance environments, including concerts, theaters, and corporate events. With its powerful output and versatile features, the Chauvet 648 stands out as an essential tool for lighting professionals.

One of the key features of the Chauvet 648 is its high-output RGBW LEDs, which allow for an extensive range of color mixing. The unit is equipped with a 25-degree beam angle, providing smooth and even wash coverage that can fill stage spaces without leaving dark spots. This makes it ideal for both wide and narrow stage setups, giving lighting designers the freedom to create dynamic and captivating visual experiences.

In terms of technology, the Chauvet 648 boasts a robust control system that supports DMX protocol for seamless integration with other lighting devices. Additionally, it features built-in automated programs, giving users the ability to run light shows without a dedicated controller. This is particularly beneficial for smaller venues or events where quick setup and operation are essential. The fixture also includes a master/slave mode, allowing multiple units to synchronize and operate together effortlessly.

Portability is a significant characteristic of the Chauvet 648. Lightweight and compact, it is designed for easy transportation and installation, making it a favorite among touring professionals. Its robust housing ensures durability, so it can withstand the rigors of frequent handling and setup in various environments.

Another noteworthy aspect is its energy efficiency. The LED technology not only reduces power consumption compared to traditional lighting fixtures but also extends the lifespan of the unit. This means less frequent replacements and lower operating costs, which is a critical consideration for many production budgets.

In conclusion, the Chauvet 648 combines high output, extensive color mixing capabilities, advanced control options, and portability, making it a powerful choice for any lighting application. Whether you're lighting up a concert, theater production, or corporate event, the Chauvet 648 is designed to meet the demands of professional lighting with ease and reliability. With its innovative features and robust performance, it's a valuable addition to any lighting designer’s toolkit.