Chauvet 648 user manual Product at a Glance, Dmx

Page 5

Product at a

Glance

Use on Dimmer

Outdoor Use

Sound-Activated

DMX

Master/Slave

x

x

P

P

P

Auto Programs

P

Auto-ranging Power Supply

P

Replaceable Fuse

P

User-Serviceable

x

 

 

Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.

∙Always connect the product to a grounded circuit to avoid the risk of electrocution.

∙Always disconnect the product from the power source before cleaning or replacing the fuse.

∙Avoid direct eye exposure to the light source while the product is on.

∙Make sure the power cord is not crimped or damaged.

∙Never disconnect the product from power cord by pulling or tugging on the cord.

∙If mounting the product overhead, always secure to a fastening device using a safety cable.

∙Make sure there are no flammable materials close to the product when operating.

∙Do not touch the product’s housing when operating because it may be very hot.

∙Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.

∙The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.

∙Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

∙Be sure that no ventilation slots on the product’s housing are blocked.

∙Never connect the product to a dimmer.

∙Make sure to replace the fuse with another of the same type and rating.

∙Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.

∙The maximum ambient temperature is 104° F (40° C). Do not operate the product at higher temperatures.

∙In the event of a serious operating problem, stop using the product immediately.

∙Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

∙Keep this User Manual for future consultation. If you sell the product to another user, be sure that they also receive this document.

Impulse™ 648 User Manual Rev. 6

Page 5 of 21

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Table of Contents Technical Specifications Before YOU Begin What Is IncludedUnpacking Instructions TextDMX Product at a GlanceProduct Overview IntroductionProduct Dimensions Fuse Replacement SetupPower Linking Diagram Mounting Diagram DMX OperationManual Control Mode Configuration StandaloneSound-Active Mode DMX Channel Assignments and Values Master/Slave ModeTechnical Information Product MaintenanceGeneral Troubleshooting Contact Information Contact ProcedureIntroduction Physical Medium Signals DMX Universes FunctionsDMX Connectivity DMX ConfigurationPersonalities Starting Address Assigning Addresses Fixture LocationDMX data cable must have the following characteristics DMX Cable ConnectorsPin to 5-Pin Conversion Chart DMX Connection Power Technical Specifications

648 specifications

The Chauvet 648 is an advanced LED wash light designed for a variety of performance environments, including concerts, theaters, and corporate events. With its powerful output and versatile features, the Chauvet 648 stands out as an essential tool for lighting professionals.

One of the key features of the Chauvet 648 is its high-output RGBW LEDs, which allow for an extensive range of color mixing. The unit is equipped with a 25-degree beam angle, providing smooth and even wash coverage that can fill stage spaces without leaving dark spots. This makes it ideal for both wide and narrow stage setups, giving lighting designers the freedom to create dynamic and captivating visual experiences.

In terms of technology, the Chauvet 648 boasts a robust control system that supports DMX protocol for seamless integration with other lighting devices. Additionally, it features built-in automated programs, giving users the ability to run light shows without a dedicated controller. This is particularly beneficial for smaller venues or events where quick setup and operation are essential. The fixture also includes a master/slave mode, allowing multiple units to synchronize and operate together effortlessly.

Portability is a significant characteristic of the Chauvet 648. Lightweight and compact, it is designed for easy transportation and installation, making it a favorite among touring professionals. Its robust housing ensures durability, so it can withstand the rigors of frequent handling and setup in various environments.

Another noteworthy aspect is its energy efficiency. The LED technology not only reduces power consumption compared to traditional lighting fixtures but also extends the lifespan of the unit. This means less frequent replacements and lower operating costs, which is a critical consideration for many production budgets.

In conclusion, the Chauvet 648 combines high output, extensive color mixing capabilities, advanced control options, and portability, making it a powerful choice for any lighting application. Whether you're lighting up a concert, theater production, or corporate event, the Chauvet 648 is designed to meet the demands of professional lighting with ease and reliability. With its innovative features and robust performance, it's a valuable addition to any lighting designer’s toolkit.
Top Page Image Contents