Setup, Fuse Replacement | Chauvet 648 specs

3.SETUP

AC Power The Impulse™ 648 has an auto-ranging power supply and can work with an input voltage range of 100~240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Follow the instructions below to change the fuse, if necessary.

Disconnect the product from the power outlet before replacing the fuse.

1.Wedge the tip of a flat head screwdriver into the slot of the fuse holder.

2.Pry the fuse holder out of the housing.

3.Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4.Insert the fuse holder back in place and reconnect power.

Installed fuse (held by plastic clip)

Spare fuse holder (inside safety cap)

Safety cap

The product does not ship with a spare fuse; however, the safety cap has room for a spare.

Page 8 of 21

Impulse™ 648 User Manual Rev. 6

648 specifications

The Chauvet 648 is an advanced LED wash light designed for a variety of performance environments, including concerts, theaters, and corporate events. With its powerful output and versatile features, the Chauvet 648 stands out as an essential tool for lighting professionals.

One of the key features of the Chauvet 648 is its high-output RGBW LEDs, which allow for an extensive range of color mixing. The unit is equipped with a 25-degree beam angle, providing smooth and even wash coverage that can fill stage spaces without leaving dark spots. This makes it ideal for both wide and narrow stage setups, giving lighting designers the freedom to create dynamic and captivating visual experiences.

In terms of technology, the Chauvet 648 boasts a robust control system that supports DMX protocol for seamless integration with other lighting devices. Additionally, it features built-in automated programs, giving users the ability to run light shows without a dedicated controller. This is particularly beneficial for smaller venues or events where quick setup and operation are essential. The fixture also includes a master/slave mode, allowing multiple units to synchronize and operate together effortlessly.

Portability is a significant characteristic of the Chauvet 648. Lightweight and compact, it is designed for easy transportation and installation, making it a favorite among touring professionals. Its robust housing ensures durability, so it can withstand the rigors of frequent handling and setup in various environments.

Another noteworthy aspect is its energy efficiency. The LED technology not only reduces power consumption compared to traditional lighting fixtures but also extends the lifespan of the unit. This means less frequent replacements and lower operating costs, which is a critical consideration for many production budgets.

In conclusion, the Chauvet 648 combines high output, extensive color mixing capabilities, advanced control options, and portability, making it a powerful choice for any lighting application. Whether you're lighting up a concert, theater production, or corporate event, the Chauvet 648 is designed to meet the demands of professional lighting with ease and reliability. With its innovative features and robust performance, it's a valuable addition to any lighting designer’s toolkit.