Chauvet 350 user manual Setup, AC Power, Fuse Replacement

Page 7

3.SETUP

AC Power

The Intimidator™ Spot LED 350 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Follow the instructions below to change the fuse, if necessary.

Disconnect the product from the power outlet before replacing the fuse.

1.Wedge the tip of a flat head screwdriver into the slot of the fuse holder.

2.Pry the fuse holder out of the housing.

3.Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4.Insert the fuse holder back in place and reconnect power.

Installed fuse

(held by plastic clip)

Safety cap

Spare fuse holder (inside safety cap)

The product does not ship with a spare fuse; however, the safety cap has room for a spare.

Intimidator™ Spot LED 350 User Manual (Rev. 02)

Page 7 of 26

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Table of Contents Text What Is IncludedBefore YOU Begin Unpacking InstructionsDMX Product at a GlanceProduct Overview IntroductionProduct Dimensions AC Power SetupFuse Replacement Power Linking Diagram Power LinkingOrientation Rigging MountingControl Panel Operation OperationStarting Address DMX Personalities Configuration14-CH DMX Channel Assignments and ValuesFrom previous Reverse color cycling with increasing speed Sound Active Mode Configuration StandaloneManual Pan/Tilt Operation Pan/Tilt Angle Restrict Display Slave units Master/Slave ModeMiscellaneous Operations Reset Software Password ChannelTechnical Information Product MaintenanceGeneral Troubleshooting Contact Information Contact ProcedureIntroduction DMX PrimerDMX Connectivity DMX ConfigurationDMX Connectivity Pin to 5-Pin Conversion Chart DMX Connection Dimensions and Weight Power Technical Specifications
Related manuals
Manual 19 pages 56.21 Kb

350 specifications

The Chauvet 350 is a remarkable lighting fixture designed for professional applications, widely recognized for its versatility and cutting-edge technologies. This model seamlessly combines powerful illumination with user-friendly features, making it a favored choice for event planners, concert organizers, and theater productions.

One of the standout features of the Chauvet 350 is its robust output. With a high wattage LED engine, it provides bright and vibrant lighting that can adapt to a variety of applications, whether it's a large concert hall or an intimate gathering. The fixture is equipped with a range of color options, allowing users to create stunning effects and atmospheres tailored to the specific needs of an event.

The technology behind the Chauvet 350 showcases its innovation in lighting design. It employs advanced optics that ensure even distribution of light, minimizing hotspots and ensuring a smooth wash of color across the entire surface. This is particularly beneficial for stage productions where uniform lighting is vital for visual coherence.

Furthermore, the Chauvet 350 integrates modern control options, supporting both DMX and wireless control systems. This flexibility enables lighting technicians to operate the fixture remotely, giving them the freedom to make adjustments on the fly without needing to be physically present at the fixture. The fixture also supports various automated features, including pre-programmed light shows, making it easier to customize experiences for different performances.

In terms of build quality, the Chauvet 350 is constructed with durability in mind. The fixture is designed to withstand the rigors of touring and the demands of professional environments. It features an efficient cooling system that prevents overheating, ensuring consistent performance over extended periods without compromising quality.

Another important characteristic is its ease of installation. The Chauvet 350 comes with various mounting options, making it adaptable for different setups, whether hung from a truss or placed on the ground. The intuitive user interface allows for quick programming and adjustment, making it accessible for users of all skill levels.

In summary, the Chauvet 350 stands out as a versatile, robust lighting fixture that merges powerful performance with intelligent features, making it an ideal choice for any lighting professional seeking to enhance their production capabilities. Its combination of advanced technologies, exceptional build quality, and user-friendly design solidifies its reputation in the world of stage and event lighting.
Top Page Image Contents