General Troubleshooting


Symptom			Possible Cause	Possible Action
		∙ Excessive load on the circuit		∙ Make sure that the total load does not
Circuit breaker or fuse				exceed 80% of the breaker or fuse
keeps blowing				nominal current
		∙ Short circuit along the power lines		∙ Check the power lines and power cords

		∙ No energy on power outlet		∙ Check power outlet
				∙ Change to another outlet

Product does not power	∙		Loose or damaged power cord	∙ Check the power cord
up		∙	Blown fuse	∙ Replace blown fuse with a good one of
		∙	Blown fuse	∙ Replace blown fuse with a good one of
				the same type and rating

		∙	Internal problem	∙ Send product for repair

		∙ Wrong starting address on the		∙ Set the correct starting address on the
			product	product
				∙ Use the right fader(s) on the controller

		∙ Wrong DMX personality on the		∙ Set the correct DMX product’s
Product does not			product	personality
Product does not				∙ Assign the faders accordingly
respond to DMX
respond to DMX		∙	Wrong polarity setting on the DMX	∙ Change the signal polarity on the
		∙	Wrong polarity setting on the DMX	∙ Change the signal polarity on the
			controller	controller

		∙ Loose or damaged DMX cable		∙ Check the DMX cable before the faulty
				unit
		∙	Internal problem	∙ Send product for repair

		∙ Signal cables are not DMX		∙ Replace non DMX cables with true
			compatible	DMX cables
		∙ Interference with AC or radio		∙ Keep DMX cables away from AC wires
			signals	or radio equipment
Intermittent DMX		∙ DMX cable too long		∙ Install an optically coupled DMX
Intermittent DMX				amplifier right before the product with
Problems				amplifier right before the product with
Problems				intermittent problems
				intermittent problems

		∙ Too many products connected		∙ Install an optically coupled DMX
				amplifier after unit #32
		∙	Terminator not connected	∙ Install a terminator, as indicated in the
				DMX Primer section.
		If you still experience problems after trying the above solutions, contact
		CHAUVET® Technical Support.

Page 20 of 26

Intimidator™ Spot LED 350 User Manual (Rev. 02)

350 specifications

The Chauvet 350 is a remarkable lighting fixture designed for professional applications, widely recognized for its versatility and cutting-edge technologies. This model seamlessly combines powerful illumination with user-friendly features, making it a favored choice for event planners, concert organizers, and theater productions.

One of the standout features of the Chauvet 350 is its robust output. With a high wattage LED engine, it provides bright and vibrant lighting that can adapt to a variety of applications, whether it's a large concert hall or an intimate gathering. The fixture is equipped with a range of color options, allowing users to create stunning effects and atmospheres tailored to the specific needs of an event.

The technology behind the Chauvet 350 showcases its innovation in lighting design. It employs advanced optics that ensure even distribution of light, minimizing hotspots and ensuring a smooth wash of color across the entire surface. This is particularly beneficial for stage productions where uniform lighting is vital for visual coherence.

Furthermore, the Chauvet 350 integrates modern control options, supporting both DMX and wireless control systems. This flexibility enables lighting technicians to operate the fixture remotely, giving them the freedom to make adjustments on the fly without needing to be physically present at the fixture. The fixture also supports various automated features, including pre-programmed light shows, making it easier to customize experiences for different performances.

In terms of build quality, the Chauvet 350 is constructed with durability in mind. The fixture is designed to withstand the rigors of touring and the demands of professional environments. It features an efficient cooling system that prevents overheating, ensuring consistent performance over extended periods without compromising quality.

Another important characteristic is its ease of installation. The Chauvet 350 comes with various mounting options, making it adaptable for different setups, whether hung from a truss or placed on the ground. The intuitive user interface allows for quick programming and adjustment, making it accessible for users of all skill levels.

In summary, the Chauvet 350 stands out as a versatile, robust lighting fixture that merges powerful performance with intelligent features, making it an ideal choice for any lighting professional seeking to enhance their production capabilities. Its combination of advanced technologies, exceptional build quality, and user-friendly design solidifies its reputation in the world of stage and event lighting.