Casablanca Fan Company C15G624L owner manual Light Kit Hardware, Light Kit Installation

Page 15

Veneto

Light Kit Hardware

Light Kit Screw (3)

Lower Glass

Light Kit

Glass Cover

Finial

Lower Bulb (3)

Light Kit Installation

Step 1.  To attach the Light KIt Mounting Plate partially install two light kit screws into the switch housing mounting plate.

Step 2.  Connect the molex plug on the Light Kit to the Fan.

Step 3.  Align the keyhole slots in the Light Kit with the light kit screws.

Step 4.  Turn the Light Kit counterclockwise until the light kit screws are firmly situated in the narrow end of the keyhole slots.

WARNING: Do not let wires become lodged between Fan Adapter and Light Kit.

Light Kit Screws

Molex Plug

Step 5.  Install the remaining screw into the Light Kit.

Step 6.  Tighten all three screws firmly.

15

Image 15
Contents Read and Save These Instructions Parts List Parts ListVeneto Proper Parts Handling If the fan does not workVeneto Unpacking IntroductionBefore You Start Safe UseSloped Ceiling Installation Mounting RecommendationsFan Size Fan Installation Mounting Bracket InstallationGetting Started Pipe Scroll Hardware Pipe Scroll AssemblyCanopy Decorative Scroll Bracket Scroll Screw Arm Rim Upper Glass AssemblyUpper Glass Hardware Hanging the FanWiring Wiring HardwarePage Keyhole Slots Round Canopy HardwareSecuring the Canopy Canopy ScrewsBlade Hardware Blade InstallationLight Kit Hardware Light Kit InstallationWall control Preparation Control Installation Installing the W-74 Wall ControlSingle W-74 Installation Neutral Dual W-74 InstallationOperation Reversing Airflow Operation PowerOperation Operation Speed ControlChanging Frequency Setting Operation CFL ModeTo enter the demonstration program Automatic Demonstration ProgramOperation Safe-Exit Light-minder ProgramOperation Fan-Minder Program Operation Home-Safe ProgramProblem Possible Remedies Troubleshooting TipsNo Need for Lubrication Care RecommendationsFan Finishes Blades