Casablanca Fan Company C3U72M Care Recommendations, Fan Finishes, Blades, No Need for Lubrication

Page 13

CARE RECOMMENDATIONS

Fan Finishes

For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish.

A vacuum cleaner brush nozzle can remove heavier dust.

Surface smudges or an accumulation of dirt and dust can be removed easily by using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish.

Blades

Wood-finish blades should be cleaned with a furniture polishing cloth. Occasionally, a light coat of furniture polish may be applied for added protection and beauty.

For painted and high-gloss blades, surface smudges or an accumulation of dirt and dust can be removed easily by using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish.

No Need for Lubrication

Never lubricate this fan! The precision motor at the heart of your Casablanca fan features sealed bearings that are lubricated for life.

Do not attempt to oil the motor.

Changing Lightbulbs

Be sure to turn the power to OFF at the wall switch or circuit breaker before changing lightbulbs.

Replace bulbs with the same type as you removed from the light fixture.

The maximum wattage rating for this fan’s light kit is 300 watts.

For questions or to locate the nearest Casablanca Authorized Service Center,

call 1-888-335-5247 toll-free, or visit us on the Web at www.casablancafanco.com.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residental installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: Any changes or modifications to the transmitter or receiver not expressly approved by Casablanca Fan Company may void one’s authority to operate this remote control.

13

Image 13
Contents Contents Safe USE Introduction Beforeyou StartUnpacking Mounting Recommendations General Guidelines Sloped Ceiling InstallationsCrossbar Mounting Bracket Installation FAN Installation Getting StartedInstalling a New Ceiling Fixture Outlet Box Using Existing Ceiling Fixture Outlet BoxCanopy Installation LAG Screw InstallationFAN Preparation Prepare for fan installation as followsBlade Installation Switch Housing BRACKET/CAP Hardware not to scale Switch Housing BRACKET/ CAP InstallationHangingthe FAN Canopy Hatch InstallationCanopy Electrical Connections Control Bracket Installation VERSATOUCH2 InstallationStandard Light Switch Wall InstallationRemote Operation Transmitter Frequency SettingIf FAN does not Work Problem Possible Remedies TroubleshootingtipsFan Finishes Care RecommendationsBlades No Need for LubricationAlabama Authorized Service CentersKentucky Oklahoma Product Specifications