Casablanca Fan Company C3U72M owner manual LAG Screw Installation, Canopy Installation

Page 5

LAG SCREW INSTALLATION

NOTE: We recommend that the ceiling box be of suﬃcient capacity to support the weight of the fan and light ﬁxture under any conditions.

Step 2. With the large washer attached, pass the lag screw through the center hole of the crossbar mounting bracket and screw into guide hole. Tighten until outlet box is mounted

ﬁrmly to beam. This box must be secured to the ceiling ﬁrmly.

CANOPY INSTALLATION

CANOPY HARDWARE

(not to scale)

Canopy Screw (4)

Canopy Hatch	Canopy
	Canopy Lock Washer (4)

Step 3. Attach the canopy to the crossbar mounting bracket with three of the 8-32 x 2 1/2 long canopy screws and lock washers provided with your Casablanca fan.Tighten using the provided screwdriver until snug against the ceiling.

NOTE: On sloped ceilings, align the canopy opening with the top or peak of the room.

Feed outlet bo through canopy

ers

Image 5

Contents Contents Unpacking Introduction Beforeyou StartSafe USE Mounting Recommendations General Guidelines Sloped Ceiling InstallationsCrossbar Mounting Bracket Installation FAN Installation Getting StartedInstalling a New Ceiling Fixture Outlet Box Using Existing Ceiling Fixture Outlet BoxCanopy Installation LAG Screw InstallationFAN Preparation Prepare for fan installation as followsBlade Installation Switch Housing BRACKET/CAP Hardware not to scale Switch Housing BRACKET/ CAP InstallationCanopy Electrical Connections Canopy Hatch InstallationHangingthe FAN Control Bracket Installation VERSATOUCH2 InstallationStandard Light Switch Wall InstallationIf FAN does not Work Transmitter Frequency SettingRemote Operation Problem Possible Remedies TroubleshootingtipsFan Finishes Care RecommendationsBlades No Need for LubricationAlabama Authorized Service CentersKentucky Oklahoma Product Specifications