FOUR SEASONS™ III (OUTSIDE USA INSTALLATION) 
OUTSIDE USA - SECONDARY SUPPORT ♦COMPLETING INSTALLATION
Step 16. Attach the fan cable to outlet box cable with the spring lock hook. Make sure the spring lock is tightly closed.
Step 17. Tuck the wires into the canopy with the wire nuts pointed upward, so that the white and black wires are on opposite sides of the canopy and all wires are clear of the canopy opening. Tuck the extra cable and screw lock hook into the canopy.
WIRE NUTS INSTALLED
NOTE: International fans and light fixtures are supplied | FAN AND OUTLET |
| |
with plug and socket connectors. Substitute these connectors | CABLES SECURED BY |
| |
for the wire nuts shown throughout this manual. | SPRING LOCK HOOK |
| |
| OUTSIDE USA - BLADE & BLADE HOLDER HARDWARE | ||
BLADE |
|
|
|
HOLDER | BLADE SCREW | FLAT WASHER | BLADE HOLDER SCREW |
| (3 PER BLADE) | (3 PER BLADE) | (2 PER BLADE) |
OUTSIDE USA - BLADE & BLADE HOLDER INSTALLATION
Step 18. Attach the blades to the blade holders with the three blade screws and flat washers provided for each blade. Hand tighten securely.
Step 19. Install the assembled blade and blade holder to the fan motor. Hand tighten securely.
Repete for each assembly.
Step 20. Attach the pull chain fob.
PROCEED TO PAGE 8.
FOB
BLADE SCREW (3 PER BLADE)
FLAT WASHER (3 PER BLADE)
BLADE HOLDER SCREW
(2 PER BLADE
HOLDER)
13