HWall-mount holder
Supports the remote unit in
IRemovable table stand
For standing the remote unit on a flat surface
EN
BEFORE YOU BEGIN
To ensure proper functioning of the EMR812HGN follow this setup procedure.
For best operation:
1.Assign different channels to different remote units.
2.Insert batteries for remote units before doing so for the main unit (see instructions for battery installation).
3.Place the main unit as close as possible next to the remote unit, reset the main unit after installing batteries. This will ensure easier synchronization between the transmission and reception of signals.
4.Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 20 to 30 meters.
Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various
Though the remote units are weather proof, they should be placed away from direct sunlight, rain or snow.
BATTERY AND CHANNEL
INSTALLATION: REMOTE UNIT
The remote
3
