About the operation of your freezer. | www.GEAppliances.com | |||
|
| Starting the Freezer |
| |
|
|
| ||
|
|
|
| |
|
| 1 | Clean the inside of the freezer with a mild solution of baking soda and water (see Care and Cleaning). | |
|
| 2 | Connect cord to power outlet. |
|
3 | On models with a Temperature Monitor or | |||
4 | Make sure the temperature control is set at 4. |
| ||
5 | Allow freezer to operate for at least four hours before placing food inside. |
| ||
6 | On models with a Temperature Monitor or | |||
|
|
|
|
|
Allow several hours after each
Turning the control to OFF stops the cooling process but does not shut off power to the freezer.
Safety Instructions Operating Instructions Installation
ALARM | POWER ON |
TEMP |
|
Temperature Monitor/High-Temp Alarm Switch (on some models)
MONITOR |
OFF ON |
Located on front of freezer.
ON OFF
ALARM SWITCH
An alarm will sound if the freezer temperature reaches unsafe levels. The alarm operates on household electricity. If the power fails, the alarm will not perform.
An ON/OFF switch allows the temperature alarm to be deactivated if desired. The freezer is shipped with the switch in the OFF position. After the freezer has run long enough to lower the temperature, you may set the switch to the ON position.
CAUTION: Adding more than 3 pounds (1.5 kg) of warm food per cubic foot of freezer capacity can trigger the alarm.
To activate the alarm, set the switch to the ON position.
To deactivate the alarm, set the switch to the OFF position.
Located on back of lid.
5