LG-SD7130
17
LG-SD7130
16
Using the Battery Pack
Charge the battery fully before the initial use of the
phone.
The phone comes with a rechargeable battery.Keep the
battery charged while not in use in order to maximize
talk and standby time when using the phone.

Installing the Battery

To install the battery, insert the bottom of the battery into
the opening on the back of the phone.Then, push the
battery down until the latch clicks.

Removing the Battery

Turn the power off.(If power is on, a loss of stored num-
bers and messages may occur.)
Push the latch upwards to detach the battery.
release
latch
slot
On Screen Icons
The phone screen displays several onscreen icons which appear
when the phone is powered on.

Icons Descriptions

Displays the strength of the signal received by the
phone and current signal strength is indicated by the
number of bars displayed on the screen.
No service
The phone is not receiving a system signal.
The Vibrate mode is selected.
When the ringer type is ‘Silent’ or ‘Light’ or when
the ringer volume is ‘Off’.
In Vibrate or Vib1+Ring or Vib2+Ring mode
Roaming
The phone is outside of its home service area.
In Alarm mode (alarm clock is set).
Indicates that a text message or voice mail has
been received
In use
Acall is in progress.
*No icon indicates the phone is in standby mode.
Shows your current battery charge strength.
(Icon shown fully charged)
Chapter 1
Getting Started