Instructions
Preparing to install the freezer.
Read these instructions completely and carefully.
Freezer Location
Instructions Safety
Your freezer should be conveniently located for
Do not install the freezer where the temperature will go below 0° F or above 110° F, because it will not maintain proper temperatures.
Be sure to install your freezer on a floor strong enough to support it when it is fully loaded.
The freezer must be solidly positioned on the floor if it is to function at its best. Shims may be used to accomplish this wherever the floor is too uneven.
If the place selected for the freezer is damp or moist, place 2 X 4’s (51 mm X 102 mm) under its entire length to assure adequate support.
Operating
Clearances
On all models, allow 3″ (76 mm) on top, back and sides for proper air circulation.
Consumer Support Troubleshooting Tips Installation Instructions
Turn right | Turn left |
to lower | to raise |
|
|
Legs at the front corners of the freezer should be set so the freezer is firmly positioned on the floor, and the front is raised just enough so the door closes easily when opened about halfway.
10
