UTOPIAN
CANOPY HATCH INSTALLATION
Step 5. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 6. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Using the screwdriver, tighten the screws firmly by hand only,
Step 7. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
Note: Write down the Serial Number and the model number for future reference.
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
BLADE TO BLADE HOLDER INSTALLATION
BLADE & BLADE HOLDER HARDWARE
BLADE SCREW | BLADE HOLDER | |
(4 PER BLADE) | ||
SCREW | ||
| ||
| (2 PER BLADE) |
RUBBER GROMMET
(4 PER BLADE)
BLADE
HOLDER
RUBBER GROMMET INSTALLATION
Step 8. Insert a rubber grommet through each blade hole of every blade. Inspect both sides of the blade to assure that the lips of the grommet are fully engaged.
CORRECT INSTALLATION
INCORRECT INSTALLATION
6