Stealth® dc
CANOPY HARDWARE
Canopy | Canopy | Canopy Screws and (4) Lock | Phillips | |
Hatch | ||||
Washers | Screwdriver | |||
| ||||
|
|
CANOPY INSTALLATION
Step 1. Attach the canopy to the ceiling plate with three of the
Canopy
NOTE: On sloped ceilings, align the canopy opening with the top or peak of the room.
Canopy
Screw
Lock
Washer
HANGING HARDWARE
Perma•Lock™ Downrod | Allen Wrench |
and Ball Assembly |
|
FAN PREPARATION
Prepare for fan installation as follows:
Remove the paper shield from the motor as shown in Figure #1.
Step 1. Loosen the set screw making sure that end of the Set Screw can not be seen within the motor coupling as shown in (Figure #2). If so, you will need to unscrew the Set Screw so that the tip of the Set Screw does not remain in the path of the downrod
PAPER MOTOR SHIELD
FIGURE 1.
Set Screw
FIGURE 2.
9