Krell Industries manual Connecting the Evolution One to Your System, Cast Connections

Page 23

SECTION FOUR

Connecting the Evolution One to Your System

This section describes Evolution One amplifier connections and outlines remote control options. Each Evolution One has a CAST 4-pin connector, a balanced input via an XLR connector, a 12 Volt trigger In/Out connection, and an RC-5 input on the back panel.

CAST Connections

Krell recommends using its proprietary Krell CAST system for unparalleled sonic performance for connections between an Evolution One amplifier and other CAST-equipped components. Krell CAST uses flexible interconnecting cables that can be drawn through tight spaces and concealed.

Balanced Connections

Evolution One amplifiers also offer balanced connections. Balanced connections not only can minimize sonic loss but also are immune to induced noise, especially for installations using long cables.

Cable Connection Steps

The following steps describe how to connect cables to an Evolution One amplifier:

1.Turn off all power sources and components before connecting inputs and out- puts.

2.Neatly organize wiring between to and from the amplifier and all components. Separate AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.

19

continued

Image 23
Contents Evolution Evolution One Monaural Power Amplifier Owner’s Reference Contents List of Illustrations Letter from Dan D’Agostino Letter from Dan D’Agostino Krell Legacy About KrellSection ONE About Krell Cast Basics Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Revolutionary Krell Cast TechnologyBest Musical Performance Cast Cable ConstructionEvolution Cast Core Technologies Ensuring Maximum PerformanceEvolution Bias Control Systems Impedance AdvantageSeparate Power Supplies Are Quiet and Powerful Operation Definition of TermsInputs and Outputs Technology Operational ModeTo Remove the Chassis from the Shipping Carton Unpacking and PlacementOpening the Amplifier Shipping Carton People needed AC Power Guidelines PlacementAnatomy of an Amplifier This section describes Evolution One features and benefitsEvolution One Amplifier and Power Supply Chassis Back Panels Evolution One Amplifier Chassis Top Evolution One Power Supply Chassis Top Cable Connection Steps Connecting the Evolution One to Your SystemCast Connections Balanced ConnectionsTurn to Amplifier Operation, on DC Protection Circuitry / Using a Tube PreamplifierVolt Trigger Remote Control OptionsRC-5 Remote Control Amplifier Operation Powering On, Powering Down, and Powering OffSwitching Between Cast and Balanced Inputs Turning Off the Lights on the Amplifier Channel Front Panel Adjusting Power Meter ModesPower Meter Range and Power Meter Wand Action Amplifier Care System Protection Amplifier TroubleshootingDiagnostic Codes Possible Condition Course of Action Warranty Page To contact the Krell Service Department Return Authorization ProcedureSpecifications

Evolution One specifications

Krell Industries is synonymous with high-fidelity audio and innovative engineering, showcasing their prowess in speaker design with the Evolution One. This speaker embodies the cutting-edge technology and striking aesthetics that Krell is recognized for in the audiophile community.

The Evolution One features a unique dual-woofer configuration, delivering powerful bass response without distortion. Each woofer is meticulously crafted from advanced composite materials, ensuring that the sound remains accurate and dynamic, even at high volumes. This design aligns perfectly with Krell's dedication to reproducing music with the utmost authenticity.

At the heart of the Evolution One is Krell's proprietary CAST (Current Mode Amplification) technology. This innovation sets Krell apart from competitors by allowing the signal to flow through a path that maintains the purity of the audio signal. By operating in current mode rather than voltage mode, CAST drastically reduces the impact of circuit interference that often plagues traditional audio systems. The result is a level of transparency and low distortion that appeals to even the most discerning audiophiles.

The speaker also incorporates advanced crossover technology, which seamlessly integrates the woofers and tweeter. Krell employs a fourth-order Linkwitz-Riley crossover to ensure that the different drivers work in perfect harmony. This feature aids in achieving a balanced and cohesive soundstage, enhancing the listening experience across various musical genres.

Visually, the Evolution One is a statement piece. Its sleek, modern design is complemented by a high-gloss finish, ensuring it not only sounds exceptional but also serves as an elegant addition to any audio setup. The robust cabinet construction eliminates unwanted vibrations, further enhancing sound clarity.

Moreover, the Evolution One is equipped with advanced bi-wiring and bi-amping options, allowing audiophiles to optimize their setups based on personal preferences and system requirements. This flexibility makes the Evolution One an adaptable choice for those looking to refine their audio systems further.

In summary, the Krell Industries Evolution One is a culmination of innovative technology, premium materials, and exquisite design. With features such as dual-woofer configurations, CAST technology, and advanced crossover design, it stands as a testament to Krell's commitment to delivering high-fidelity audio experiences that resonate with both casual listeners and dedicated audiophiles alike.