Krell Industries Evolution One manual Remote Control Options, RC-5 Remote Control, Volt Trigger

Page 25

Remote Control Options

The Evolution One amplifier is compatible with the remote controls included with the Krell Evolution Two preamplifier, other Krell preamplifiers or preamplifier/ processors, and it is compatible with the Universal Krell Touch Screen Remote.

Please contact your authorized Krell dealer, distributor, or Krell, if you wish to pur- chase a separate remote control for the Evolution One amplifier.

The following remote control options are available, for amplifiers installed outside of the listening area:

RC-5 Remote Control

Each Evolution One amplifier has an RC-5 remote input (18) on the back panel. The RC-5 remote input accepts a remote command enabling it to switch between stand-by and operational modes and to switch between CAST and bal- anced inputs. The RC-5 remote control is used with a third party remote control system that provides RC5 (IR) data with the carrier intact, via a wired connection. A stereo tip, ring, sleeve 1/8” mini connector is used in the following configura- tion: Tip = RC-5 data, Ring = +5 V, Sleeve = GND.

12 Volt Trigger

The Evolution One amplifier has a 12 Volt trigger input/output connection (19) that sends and receives 12 VDC power on/off (12 V trigger) signals to/from other Krell components and other devices that incorporate a 12 Volt trigger. Mono 1/8” mini connectors are utilized with the following configuration: Tip = +12 V, Sleeve = GND.

Notes

When the Evolution One is in the operational mode, the 12 VDC Out provides

12 Volts of DC output. When the component is in the stand-by mode or off, the DC output is 0 Volts.

A minimum of 30 mA is required to operate the 12 Volt trigger.

21

Image 25
Contents Evolution Evolution One Monaural Power Amplifier Owner’s Reference Contents List of Illustrations Letter from Dan D’Agostino Letter from Dan D’Agostino Krell Legacy About KrellSection ONE About Krell How Cast and Krell Current Mode Interact Voltage Signal Transmission Traditional Audio SystemRevolutionary Krell Cast Technology Cast BasicsEvolution Cast Cast Cable ConstructionBest Musical Performance Core Technologies Ensuring Maximum PerformanceEvolution Bias Control Systems Impedance AdvantageSeparate Power Supplies Are Quiet and Powerful Inputs and Outputs Definition of TermsOperation Technology Operational ModeOpening the Amplifier Shipping Carton Unpacking and PlacementTo Remove the Chassis from the Shipping Carton People needed AC Power Guidelines PlacementAnatomy of an Amplifier This section describes Evolution One features and benefitsEvolution One Amplifier and Power Supply Chassis Back Panels Evolution One Amplifier Chassis Top Evolution One Power Supply Chassis Top Cast Connections Connecting the Evolution One to Your SystemBalanced Connections Cable Connection StepsTurn to Amplifier Operation, on DC Protection Circuitry / Using a Tube PreamplifierRC-5 Remote Control Remote Control OptionsVolt Trigger Amplifier Operation Powering On, Powering Down, and Powering OffSwitching Between Cast and Balanced Inputs Power Meter Range and Power Meter Wand Action Adjusting Power Meter ModesTurning Off the Lights on the Amplifier Channel Front Panel Amplifier Care System Protection Amplifier TroubleshootingDiagnostic Codes Possible Condition Course of Action Warranty Page To contact the Krell Service Department Return Authorization ProcedureSpecifications

Evolution One specifications

Krell Industries is synonymous with high-fidelity audio and innovative engineering, showcasing their prowess in speaker design with the Evolution One. This speaker embodies the cutting-edge technology and striking aesthetics that Krell is recognized for in the audiophile community.

The Evolution One features a unique dual-woofer configuration, delivering powerful bass response without distortion. Each woofer is meticulously crafted from advanced composite materials, ensuring that the sound remains accurate and dynamic, even at high volumes. This design aligns perfectly with Krell's dedication to reproducing music with the utmost authenticity.

At the heart of the Evolution One is Krell's proprietary CAST (Current Mode Amplification) technology. This innovation sets Krell apart from competitors by allowing the signal to flow through a path that maintains the purity of the audio signal. By operating in current mode rather than voltage mode, CAST drastically reduces the impact of circuit interference that often plagues traditional audio systems. The result is a level of transparency and low distortion that appeals to even the most discerning audiophiles.

The speaker also incorporates advanced crossover technology, which seamlessly integrates the woofers and tweeter. Krell employs a fourth-order Linkwitz-Riley crossover to ensure that the different drivers work in perfect harmony. This feature aids in achieving a balanced and cohesive soundstage, enhancing the listening experience across various musical genres.

Visually, the Evolution One is a statement piece. Its sleek, modern design is complemented by a high-gloss finish, ensuring it not only sounds exceptional but also serves as an elegant addition to any audio setup. The robust cabinet construction eliminates unwanted vibrations, further enhancing sound clarity.

Moreover, the Evolution One is equipped with advanced bi-wiring and bi-amping options, allowing audiophiles to optimize their setups based on personal preferences and system requirements. This flexibility makes the Evolution One an adaptable choice for those looking to refine their audio systems further.

In summary, the Krell Industries Evolution One is a culmination of innovative technology, premium materials, and exquisite design. With features such as dual-woofer configurations, CAST technology, and advanced crossover design, it stands as a testament to Krell's commitment to delivering high-fidelity audio experiences that resonate with both casual listeners and dedicated audiophiles alike.