Cal Flame Portable Spa specs

Jets

Press the Jets button:

•Once to activate low speed pump.

•Twice to activate high speed.

•Three times to turn pump off.

Light

Press the Light button to turn on the light. Press it once again to turn the light off. All optional lighting such as the control panel light and cabinet perimeter lighting is controlled by the Light button and will turn on and off with the spa light.

Option

Press the Option button to turn on the pump 2. Press it once again to turn off the pump 2 (6200 Controls only).

6300 Controls - Pump 2 and Pump 3 Sequence

•Press Option button once to activate high speed pump 2.

•Press Option button twice to activate high speed pump 3 and high speed pump 2

•Press 3 times to activate pump 3 hi speed only

•Press 4 times to turn pumps off

Automatic Time outs

These features will automatically turn themselves off during periods of continuous use:

•	Low speed pump	After 4 hours
•	High speed pumps	After 15 minutes
•	Optional circulation pump	After 15 minutes
•	Optional turbo	After 15 minutes
•	Spa light	After 15 minutes

Setting Filtration Cycles

Your spa is programmed to filter twice a day. The first cycle will begin 6 minutes after the spa is turned on and the second cycle 12 hours later. The factory has programmed the cycle to last for 2 hours but this can be switched to 4, 6, or 8 hours depending on your requirements. To set filtration time, turn off the power to the spa at the time of day you would like one of the filtration cycles to begin then turn back on after 30 seconds. When power has been restored, press the Temp button then the Jets button. Press Temp button again to change the filtering cycle duration. When desired duration is selected press the Jets button to exit.

At the beginning of each filtering cycle the Turbo system will run for approximately 30 seconds. The low speed pump will run for the duration of the filtering cycle and if an Ozone system is installed it will be activated. During filtering, FC will appear on the main display.

11 OperatingYour

Spa

Your new spa comes equipped with an electric heater. Following the directions listed below will ensure the most efficient operation:

NOTE: This method is only for spa usage under two hours a week.

•Keep the spa’s operating temperature 5˚F below the desired usage temperature when not in use. One or two hours before use, set the temperature to the desired temperature.

•If the spa usage exceeds two hours a week, the set temperature should remain at the desired usage temperature.

•The air venturis should be used sparingly. When open, water temperature drops quite rapidly and can also dissipate chemicals.

Allowing the water temperature to lower more than 10˚F below the desired usage temperature and reheating it prior to usage will cause the heater to operate longer than it normally would maintaining the desired temperature. Doing this will increase your operating cost and makes your heater work more than necessary.

2009 Portable Spa

LTR20091000, Rev. A

www.calspas.com

Portable Spa specifications

The Cal Flame Portable Spa is a remarkable addition to outdoor relaxation, combining innovation and comfort in a sleek design. This portable hot tub provides users with the luxury of a spa experience right in their own backyard or on the go. One of the standout features of the Cal Flame Portable Spa is its easy setup and compact design, allowing for straightforward installation and mobility. Made with durable materials, these spas are built to withstand various weather conditions, ensuring longevity and reliability.

One of the key characteristics of the Cal Flame Portable Spa is its seating capacity. Designed to accommodate multiple users, many models can comfortably fit between four to six people, making it perfect for family gatherings or social events. The ergonomic seats provide optimal support, allowing users to unwind and relax in comfort, enhancing the overall experience.

Heating technology is another highlight of this portable spa. Equipped with a powerful heating system, users can easily adjust the water temperature to their liking, offering a customizable experience. The energy-efficient heater ensures that your spa is warm and ready for use while also keeping utility costs low.

The hydromassage jets in the Cal Flame Portable Spa play a pivotal role in creating a soothing atmosphere. Strategically positioned, these jets deliver a targeted massage experience, relieving stress and tension in muscles. Users can also control the intensity and direction of the jets, tailoring their spa experience to individual preferences.

In addition to comfort and relaxation, safety features are paramount in the Cal Flame Portable Spa. It comes with a secure cover, reducing heat loss and preventing unauthorized access when not in use. The spa's design also incorporates slip-resistant surfaces to minimize the risk of accidents.

Lastly, the aesthetic appeal of the Cal Flame Portable Spa cannot be overlooked. With a variety of colors and finishes available, users can choose a design that complements their outdoor décor. The combination of function and style makes the Cal Flame Portable Spa an attractive feature in any outdoor space, promoting relaxation and leisure for years to come. Overall, this portable spa delivers an exceptional hydrotherapy experience, perfect for enhancing your outdoor lifestyle.