Bush Hog 1145 manual See Your Bush HOG Dealer

Page 18
(SG-38)
(SG-37)
(SG-34)
(SG-21)

SAFETY

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

SAFETY

Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is spilled, move machine away from the area of the spill and avoid creating any source of ignition until the fuel has evaporated. (SBH-49)

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Use caution and wear protective gloves when handling sharp objects such as blades, knives, and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not worn.

Avoid contact with hot surfaces of the engine or muffler. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Never allow anyone to get under the loader or attachment or to reach through the loader lift arms when raised. Serious injury could result from crushing or pinching by the loader or attachment. (SL-06)

PARTS INFORMATION

Bush Hog products are designed utilizing specifically matched system components to ensure optimum equipment performance. These parts are made and tested to Bush Hog specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and

safety. (SPBH-2)

SEE YOUR BUSH HOG DEALER

1145 01/11

Safety Section 1-14

© 2011 Alamo Group Inc.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 1145 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1145 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 1145 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Bush HOG Dealer Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Model NameD469 1145 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsProper Ballasting and Wheel Spacing Dismounting Loader and Mounting Loader to Tractor Dismounting LoaderAssembly Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Getting On and Off the Tractor Tractor BallastBoarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Carrying the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Page Maintenance Section Maintenance 1145 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Adjusting Bucket Lever IndicatorCylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Limited Warranty To the OWNER/OPERATOR/DEALER SOM-01/11 Printed U.S.A

1145 specifications

The Bush Hog 1145 is a versatile and robust rotary cutter designed for both commercial and residential applications, making it a favorite among landowners and agricultural professionals alike. Known for its exceptional cutting performance and reliability, the 1145 is ideal for clearing overgrown fields, maintaining pastures, and managing landscapes.

One of the standout features of the Bush Hog 1145 is its heavy-duty construction. Built with a rugged frame and durable components, this rotary cutter is designed to withstand tough operating conditions. The cutter is equipped with a 1/4-inch steel deck that provides superior strength and longevity, ensuring it can handle the rigors of frequent use without the risk of damage.

The Bush Hog 1145 utilizes a high-performance cutting system consisting of specially designed blades that effectively cut through thick grass, brush, and weeds. The blades can be easily serviced or replaced, allowing for minimal downtime and maintenance. The ability to adjust cutting height makes the 1145 suitable for a variety of terrain types, providing optimal performance no matter the environment.

In terms of technology, the Bush Hog 1145 incorporates advanced design elements that enhance its usability. The cutter features a slip clutch that protects the drive system from damage during sudden impacts, allowing the cutter to operate smoothly even when encountering obstacles. Additionally, a fully enclosed gear box helps to ensure that the drivetrain remains well-lubricated and protected from dirt and debris.

Another noteworthy characteristic of the Bush Hog 1145 is its user-friendly design. The rotary cutter can be easily attached to a wide range of tractors, thanks to its standard 3-point hitch compatibility. The lightweight nature of the cutter allows for easy maneuverability, making it ideal for both novice and experienced operators.

User feedback highlights the Bush Hog 1145's efficiency, especially in dense vegetation management. Its adaptability and ease of maintenance further solidify its position as a top choice in the rotary cutter market.

In summary, the Bush Hog 1145 rotary cutter is characterized by its robust construction, advanced cutting capabilities, and user-friendly features. It is a reliable tool that stands out in the landscape maintenance industry, offering versatility for various applications and terrains. Whether for large-scale agricultural use or home landscaping projects, the Bush Hog 1145 continues to deliver exceptional performance.
Top Page Image Contents