Bush Hog 1145 manual Equipment Operation Safety Instructions and Practices

Page 9
(SG-41)
(SL-19)
(SG-33)
(SG-32)

SAFETY

Prolonged operation may cause operator boredom and fatigue affecting safe operation. Take scheduled work breaks to help prevent these potentially impaired operating conditions. Never operate the Implement and Tractor in a fatigued or bored mental state which impairs proper and safe operation.

Use extreme caution when getting onto the Implement to perform repairs, maintenance and when removing accumulated material. Only stand on solid flat surfaces to ensure good footing. Use a ladder or raised stand to access high spots which cannot be reached from ground level. Slipping and falling can cause serious injury or death.

Use extreme care when loading, carrying or handling any agricultural fertilizers, chemicals or biological residue. Follow the manufacturer’s handling instructions and wear appropriate Personal Protective Equipment including gloves, safety glasses and respirator when required. If you are using a tractor equipped with a cab, make sure the cab is rated for appropriate environmental exposure. Be safe and always wear proper protection. Short or long term exposure to certain chemicals and materials can result in serious injury or death.

Repeated or substantial breathing of hazardous dusts, including crystalline silica, could cause fatal or serious respiratory disease including silicosis. Concrete, masonry, many types of rock, and various other materials contain silica sand. California lists respirable crystalline silica as a substance known to cause cancer. Operation of this equipment under certain conditions may generate airborne dust particles that could contain crystalline silica. In those conditions, personal protective equipment including an appropriate respirator must be used. If excessive dust is generated, a dust collection or suppression system should also be used during operation.

SAFETY

Equipment Operation Safety Instructions and Practices

This Implement may be wider than the Tractor. Be careful when operating or transporting this equipment to prevent the Implement from running into or striking sign posts, guard rails, concrete abutments or other solid objects. Such an impact could cause the Implement and Tractor to pivot violently resulting in loss of steering control, serious injury, or even death. Never allow the Implement to contact obstacles. (S3PT-12)

Never grasp control levers when mounting the machine. (SBH-4)

1145 01/11

Safety Section 1-5

© 2011 Alamo Group Inc.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 1145 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety1145 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 1145 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Bush HOG Dealer Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Model Name Decal DescriptionD469 1145 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions AssemblyProper Ballasting and Wheel Spacing Dismounting Loader Dismounting Loader and Mounting Loader to TractorAssembly Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Carrying the Load Lifting the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Page Maintenance Section Maintenance 1145 01/11 Maintenance Section Lubrication Schedule Adjusting Bucket Lever Indicator Daily MaintenanceLift and Bucket Cylinder Disassembly Cylinder ServiceLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Limited Warranty To the OWNER/OPERATOR/DEALER SOM-01/11 Printed U.S.A

1145 specifications

The Bush Hog 1145 is a versatile and robust rotary cutter designed for both commercial and residential applications, making it a favorite among landowners and agricultural professionals alike. Known for its exceptional cutting performance and reliability, the 1145 is ideal for clearing overgrown fields, maintaining pastures, and managing landscapes.

One of the standout features of the Bush Hog 1145 is its heavy-duty construction. Built with a rugged frame and durable components, this rotary cutter is designed to withstand tough operating conditions. The cutter is equipped with a 1/4-inch steel deck that provides superior strength and longevity, ensuring it can handle the rigors of frequent use without the risk of damage.

The Bush Hog 1145 utilizes a high-performance cutting system consisting of specially designed blades that effectively cut through thick grass, brush, and weeds. The blades can be easily serviced or replaced, allowing for minimal downtime and maintenance. The ability to adjust cutting height makes the 1145 suitable for a variety of terrain types, providing optimal performance no matter the environment.

In terms of technology, the Bush Hog 1145 incorporates advanced design elements that enhance its usability. The cutter features a slip clutch that protects the drive system from damage during sudden impacts, allowing the cutter to operate smoothly even when encountering obstacles. Additionally, a fully enclosed gear box helps to ensure that the drivetrain remains well-lubricated and protected from dirt and debris.

Another noteworthy characteristic of the Bush Hog 1145 is its user-friendly design. The rotary cutter can be easily attached to a wide range of tractors, thanks to its standard 3-point hitch compatibility. The lightweight nature of the cutter allows for easy maneuverability, making it ideal for both novice and experienced operators.

User feedback highlights the Bush Hog 1145's efficiency, especially in dense vegetation management. Its adaptability and ease of maintenance further solidify its position as a top choice in the rotary cutter market.

In summary, the Bush Hog 1145 rotary cutter is characterized by its robust construction, advanced cutting capabilities, and user-friendly features. It is a reliable tool that stands out in the landscape maintenance industry, offering versatility for various applications and terrains. Whether for large-scale agricultural use or home landscaping projects, the Bush Hog 1145 continues to deliver exceptional performance.
Top Page Image Contents