Bush Hog 1145 manual Operation

Page 78
(SL-38)
(SL-34)
(SL-04)
(SG-19)

OPERATION

OPERATION

Transport only at speeds where you can maintain control of the equipment. Serious accidents and injuries can result from operating this equipment at high speeds. Understand the Tractor and Implement and

how it handles before transporting on streets and highways. Make sure the Tractor steering and brakes are in good condition and operate properly.

Before transporting the Tractor and Implement, determine the proper transport speeds for you and the equipment. Make sure you abide by the following rules:

Test the tractor at a slow speed and increase the speed slowly. Apply the Brakes smoothly to determine the stopping characteristics of the Tractor and Implement. As you increase the speed of the Tractor the stopping distance increases. Determine the maximum transport speed not to exceed 20 mph (30 kph) for transporting this equipment.

Test the equipment at a slow speed in turns. Increase the speed through the turn only after you determine that the equipment can be operated at a higher speed. Use extreme care and reduce your speed when turning sharply to prevent the tractor and implement from turning over. Determine the maximum turning speed for you and this equipment before operating on roads or uneven ground.

Only transport the Tractor and Implement at the speeds which allow you to properly control the equipment.

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes or worn tires. When operating down a hill or on wet or rain slick roads, the braking distance increases: use extreme care and reduce your speed. When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy.

Before transporting the tractor and Loader engage the loader valve travel lock to prevent inadvertent contact with the joystick controller causing sudden dropping of the loader and attachment. If the loader attachment, such as a bucket, were to drop suddenly and hit the ground while transporting, the tractor could stop immediately resulting in the operator hitting the steering wheel or flying our of the operator’s seat. Serious injury could result.

Lower the loader to the bed of the truck or trailer when transporting the tractor and loader with a truck. Measure to ensure the transport height does not exceed the legal limits. Contact with overhead obstructions or power lines can cause property damage or serious injury.

Before dismounting the tractor and loader, lower the loader to the ground or onto solid support blocks. Sudden dropping of the loader and attachment could result in serious injury.

1145 01/11

Operation Section 4-38

© 2011 Alamo Group Inc.

Page 77 Page 79
Image 78
Page 77 Page 79
Contents 1145 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1145 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 1145 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Bush HOG Dealer Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Model NameD469 1145 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsProper Ballasting and Wheel Spacing Dismounting Loader and Mounting Loader to Tractor Dismounting LoaderAssembly Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Getting On and Off the Tractor Tractor BallastBoarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Carrying the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Page Maintenance Section Maintenance 1145 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Adjusting Bucket Lever IndicatorCylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Limited Warranty To the OWNER/OPERATOR/DEALER SOM-01/11 Printed U.S.A

1145 specifications

The Bush Hog 1145 is a versatile and robust rotary cutter designed for both commercial and residential applications, making it a favorite among landowners and agricultural professionals alike. Known for its exceptional cutting performance and reliability, the 1145 is ideal for clearing overgrown fields, maintaining pastures, and managing landscapes.

One of the standout features of the Bush Hog 1145 is its heavy-duty construction. Built with a rugged frame and durable components, this rotary cutter is designed to withstand tough operating conditions. The cutter is equipped with a 1/4-inch steel deck that provides superior strength and longevity, ensuring it can handle the rigors of frequent use without the risk of damage.

The Bush Hog 1145 utilizes a high-performance cutting system consisting of specially designed blades that effectively cut through thick grass, brush, and weeds. The blades can be easily serviced or replaced, allowing for minimal downtime and maintenance. The ability to adjust cutting height makes the 1145 suitable for a variety of terrain types, providing optimal performance no matter the environment.

In terms of technology, the Bush Hog 1145 incorporates advanced design elements that enhance its usability. The cutter features a slip clutch that protects the drive system from damage during sudden impacts, allowing the cutter to operate smoothly even when encountering obstacles. Additionally, a fully enclosed gear box helps to ensure that the drivetrain remains well-lubricated and protected from dirt and debris.

Another noteworthy characteristic of the Bush Hog 1145 is its user-friendly design. The rotary cutter can be easily attached to a wide range of tractors, thanks to its standard 3-point hitch compatibility. The lightweight nature of the cutter allows for easy maneuverability, making it ideal for both novice and experienced operators.

User feedback highlights the Bush Hog 1145's efficiency, especially in dense vegetation management. Its adaptability and ease of maintenance further solidify its position as a top choice in the rotary cutter market.

In summary, the Bush Hog 1145 rotary cutter is characterized by its robust construction, advanced cutting capabilities, and user-friendly features. It is a reliable tool that stands out in the landscape maintenance industry, offering versatility for various applications and terrains. Whether for large-scale agricultural use or home landscaping projects, the Bush Hog 1145 continues to deliver exceptional performance.
Top Page Image Contents