Bush Hog TD-1100 manual Spindle Belt Adjustment, Spindle Belt Replacement

Page 13

Figure 4-1 B (5) 30 Shots Before Each Use

(1) 3 Shots Before Each Use

Figure 4-1 C

(5) 10 Shots Before Each Use -

(Access through holes in shields of

telescoping driveline)

(7) 40 Hrs

 

(9) 40 Hrs

 

 

 

(3) Before

 

 

 

 

 

 

 

 

 

 

 

 

(10) 40 Hrs

 

 

Each Use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(8) 40 Hrs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(11) End Of Season

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(4) Before Each Use (10) 40 Hrs

 

4-3 SPINDLE BELT ADJUSTMENT

Belt tensions should be checked every 40 hours to get maximum life from drive belts and best perfor- mance from the cutter. Belt tension is adjusted by increasing or decreasing the length of the spring on the moveable idlers. For proper belt tension on the mower, the spring lengths should be set at 2- 7/8”. (Figure 4-2) To adjust the spring length, loosen or tighten the 1/2” hex nuts on the spring adjustment rod until the correct spring length is reached.

4-4 SPINDLE BELT REPLACEMENT

Use only genuine Bush Hog replacement parts.

A. Flip up black latches and remove right and left side shields. To remove the outside shields on the wing cutter decks, the wings must be in the folded position.

B. Relieve spring tension by loosening the two 1/2” hex nuts on each spring adjustment rod. (Figure 4-2)

C. Remove old belt.

D. Install new belt as shown below. (Also refer to the decal on underside of belt shield)

1.Disconnect the adjustment rod from the idler assembly. (Figure 4-2)

2.Place belt into the groove on the driving sheave.

3.Work the belt over the other sheaves.

4.Connect the adjustment rod and the idler assembly.

5.Tighten the compression springs on the drive to 2-7/8” long. Tighten the jam nut on the adjustment rod.

6.Replace all shields before operating machine.

 

Figure 4-2 Spindle Belt Diagram

 

 

 

 

 

Adjustment Rod

Idler Assembly

& Spring

 

 

 

 

 

 

 

 

 

 

 

2-7/8”

Driving Sheave

At Gearbox

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyTri-Deck Finishing Mower Important Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsIntroduction Section Introduction and DescriptionAttaching to Tractor Section Preparation for USECutting Height Adjustment General SafetySection Operating Instructions Transporting OperationMaintenance Check List Section MaintenanceSpindle Belt Replacement Spindle Belt AdjustmentTroubleshooting Blade Replacement83343 Safety DecalsDecals American Torque SpecificationsBush HOG

TD-1100 specifications

The Bush Hog TD-1100 is a versatile and powerful implement designed for agricultural and landscaping applications. Renowned for its robust construction and reliability, this rotary cutter is capable of handling a variety of vegetation types, making it an ideal choice for both professional and amateur land maintenance tasks.

One of the standout features of the TD-1100 is its cutting width of 11 feet, which allows for efficient and thorough mowing of large areas in a single pass. This size not only enhances productivity but also ensures that users can cover more ground in less time. The machine is equipped with a heavy-duty, durable frame designed to withstand the rigors of tough field conditions, providing longevity and dependability for years of service.

Technologically, the Bush Hog TD-1100 incorporates a series of high-quality blades that offer a sharp and clean cut, reducing the likelihood of damage to the vegetation and promoting healthier plant growth. The blades are designed for easy replacement, ensuring that maintenance is straightforward and can be performed quickly. Additionally, its gearbox is built to handle high torque loads, delivering power efficiently from the tractor to the cutter, further enhancing cutting performance.

The TD-1100 features adjustable cutting height settings, allowing users to customize the height based on specific needs and conditions. This capability is particularly useful for managing different types of vegetation and achieving the desired finish. Furthermore, the rotary cutter comes equipped with safety features such as a shielded design and a slip clutch, ensuring safe operation even in challenging environments.

Another notable characteristic of the Bush Hog TD-1100 is its compatibility with a wide range of tractors. With a minimum horsepower requirement, it fits easily among various agricultural setups, making it accessible for a broader range of users.

Overall, the Bush Hog TD-1100 rotary cutter stands out as a reliable, effective, and user-friendly solution for those looking to maintain their landscapes efficiently. Its combination of durability, advanced technology, and practical features make it a top choice in the market for rotary cutters, whether for large farms or small hobby projects.

Investing in a Bush Hog TD-1100 ensures that users can tackle heavy-duty mowing tasks with confidence and ease, enhancing productivity and the overall appearance of their properties.
Top Page Image Contents