Bush Hog TD-1100 manual Section Maintenance, Maintenance Check List

Page 12

SECTION IV

MAINTENANCE

4-1 MAINTENANCE CHECK LIST

Perform scheduled maintenance as outlined below. Lower implement to ground, turn off tractor, and set parking brake before doing maintenance inspections or work. All bolts should be torqued as indicated in torque chart unless otherwise indicated.

WARNING

THE MOWER CAN FALL FROM HYDRAULIC SYSTEM FAILURE. TO AVOID SERIOUS INJURY OR DEATH, SECURELY SUPPORT MOWER BEFORE WORKING UNDERNEATH.

BEFORE EACH USE.

1.Check tractor tire air pressure. Refer to tractor oper- ator’s manual. Mower transport tire pressure should be 22 psi; deck tire pressure should be 50 psi.

2.Check blades and spindles to be sure that no foreign objects such as wire or steel strapping bands are wrapped around them.

3.Check blade bolts for tightness. Tighten blade bolts to 76 ft./lbs.

4.Inspect blades for wear. Replace if necessary per paragraph 4-5. Use only genuine Bush Hog replacement parts. If it is necessary to sharpen the blades, remove the blades from the spindles before sharpening. DO NOT sharpen blades while still attached to mower.

5.Make certain all shields are in place and in good condition. Repair or replace any missing or damaged shields.

6.Inspect wheel(s) for wear, damage or foreign objects. Repair or replace if necessary.

7.Perform BEFORE EACH USE lubrication per paragraph 4-2.

8.During operation, listen for abnormal sounds which might indicate loose parts, damaged bearings, or other damage. Correct any deficiency before con- tinuing operation.

AFTER EACH USE

1.Clean all debris from machine especially under- side of deck, underneath belt shield and off safety decals. Replace any missing or illegible decals.

2.Inspect cutter for worn or damaged compo- nents. Repair or replace before next use. Any replacement components installed during repair shall include the components’ current safety decals speci- fied by the manufacturer to be affixed to the compo- nent.

3.Store cutter in a dry place.

40HOURS

1.Check belt for proper tension. Refer to para- graph 4-3.

4-2 LUBRICATION (Figures 4-1A, B & C)

NOTE

The multi-purpose grease referenced in this section is an NLGI Grade 2 type grease. Figure 4-2 shows the necessary position for servicing wing drivelines.

BEFORE EACH USE

1.Driveline Universal Joints - Apply multi-purpose grease with grease gun.

2.Driveline Guard - Apply 2-3 shots of multi-pur- pose grease with grease gun to plastic fitting.

3.Wheels - Apply multi-purpose grease with grease gun.

4.Caster Pivot - Apply multi-purpose grease with grease gun.

5.Constant Velocity (CV) Joint - Position CV joint as straight as possible to be sure grease will pene- trate to ball joint. Lubricate the central body with a minimum of 30 shots of grease every 8 hours. Lubricate telescoping members with 10 shots every 8 hours and every 40 hours pull the two sections apart, apply thin coat of multi-purpose grease to outside of inner (male) section and reassemble.

20HOURS

6.Deck Drivelines - Disconnect PTO driveline, pull the two sections apart, apply thin coat of multi- purpose grease to outside of inner (male) section. Reassemble sections and install. Pull each section to be sure driveline and shields are securely con- nected. Make certain PTO shielding is in good condi- tion.

40HOURS

7.Gearboxes (5) - Add EP80W-90 gear oil, if nec- essary, to bring oil level to check plug or dip stick mark.

8.Wing Pivots - Apply 5 shots of multi-purpose grease with grease gun.

9.Cylinder Rod Lugs - Apply 5 shots of multi-pur- pose grease with grease gun.

10.Deck Pivots - Apply 5 shots of multi-purpose grease with grease gun.

END OF SEASON

11.Transport Wheel Bearings - Pack transport wheel bearings with grease at end of each mowing season.

Figure 4-1A

(2) Before Each Use

(1) Before Each Use

To Remove Shield: Turn slotted head 90° with screwdriver, remove turn screw and slide cover back.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Bush HOG Congratulations Table of Contents Retail CUSTOMER’S Responsibility Under the Bush HOG WarrantyThis Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesTri-Deck Finishing Mower Important Safety Precautions EMPLOYERS, Employees and Operations Employee Tractor Operating InstructionsSection Introduction and Description IntroductionSection Preparation for USE Attaching to TractorGeneral Safety Cutting Height AdjustmentSection Operating Instructions Operation TransportingSection Maintenance Maintenance Check ListSpindle Belt Adjustment Spindle Belt ReplacementBlade Replacement TroubleshootingSafety Decals 83343Decals Torque Specifications AmericanBush HOG

TD-1100 specifications

The Bush Hog TD-1100 is a versatile and powerful implement designed for agricultural and landscaping applications. Renowned for its robust construction and reliability, this rotary cutter is capable of handling a variety of vegetation types, making it an ideal choice for both professional and amateur land maintenance tasks.

One of the standout features of the TD-1100 is its cutting width of 11 feet, which allows for efficient and thorough mowing of large areas in a single pass. This size not only enhances productivity but also ensures that users can cover more ground in less time. The machine is equipped with a heavy-duty, durable frame designed to withstand the rigors of tough field conditions, providing longevity and dependability for years of service.

Technologically, the Bush Hog TD-1100 incorporates a series of high-quality blades that offer a sharp and clean cut, reducing the likelihood of damage to the vegetation and promoting healthier plant growth. The blades are designed for easy replacement, ensuring that maintenance is straightforward and can be performed quickly. Additionally, its gearbox is built to handle high torque loads, delivering power efficiently from the tractor to the cutter, further enhancing cutting performance.

The TD-1100 features adjustable cutting height settings, allowing users to customize the height based on specific needs and conditions. This capability is particularly useful for managing different types of vegetation and achieving the desired finish. Furthermore, the rotary cutter comes equipped with safety features such as a shielded design and a slip clutch, ensuring safe operation even in challenging environments.

Another notable characteristic of the Bush Hog TD-1100 is its compatibility with a wide range of tractors. With a minimum horsepower requirement, it fits easily among various agricultural setups, making it accessible for a broader range of users.

Overall, the Bush Hog TD-1100 rotary cutter stands out as a reliable, effective, and user-friendly solution for those looking to maintain their landscapes efficiently. Its combination of durability, advanced technology, and practical features make it a top choice in the market for rotary cutters, whether for large farms or small hobby projects.

Investing in a Bush Hog TD-1100 ensures that users can tackle heavy-duty mowing tasks with confidence and ease, enhancing productivity and the overall appearance of their properties.
Top Page Image Contents