Brinkmann Sl 7 owner manual Step

Page 4

Step 3

Slide the two slots in the back of main housing onto the screws.

Step 4

Select a location within 15 feet from the main housing to mount the solar panel module. The solar panel module must be mounted where it will receive full, direct sunlight for several hours each day.

Step 5

Firmly plug the solar panel module cord into the main housing.

Step 6

Mount the solar panel module in a sunny location where it will receive full, direct sunlight for several hours each day.

NOTE: Shaded areas will not allow the solar panel to fully charge the battery. This will drastically reduce the number of activations per night.

Step 7

Aim the solar panel toward the south, fac-

 

ing upward at about 45° angle. The

 

adjustable base allows mounting on most

 

vertical, horizontal or sloping surface

45°

such as a wall, post or roof. Excess cord

can be tucked under the base securely.

 

3

Image 4
Contents Assembly and Operating Instructions Important Before First USE Solar Panel Detection ZoneAssembly Instructions Home Security Main HousingMain Housing Mounting Screws Solar Panel Module with CordStep Motion Detector Head Feet Testing Instructions Bulb Lens Rear Housing Battery Tape Front Housing Disconnect wires from battery terminals and remove batteryChanging Bulb Changing BatteriesCleaning Storage Wintertime Tips Battery is not fully charged or needs replacementSolar Panel Module Cord If lights blink on and offIf lights come on randomly Troubleshooting & Important Information con- tinuedIf range is too short or too long Cut along dotted line TemplateScrew Hole 140-6007-0 Home Security Accessories ONE Year Limited Warranty