INSTR_Window
Changing Battery
Step 1
Remove lens from top housing by turning lens clockwise.
Step 2
With top housing upside down (solar panel facing down), push battery compartment tab and lift off battery compartment lid.
Step 3
Remove battery. Replace with new
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the tabs with the slots in top housing. Turn counter- clockwise to lock in place.
NOTE: These lights utilize L.E.D. (Light Emitting Diode) technology. There are no bulbs to replace.
Cleaning
It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow the battery to fully charge. This will shorten the life of the battery and cause the light to malfunction. Clean regularly with a dampened cloth or paper towel.
5
IMPORTANT: The EPA Certified RBRC® Battery Recycling Seal on the
indicates The Brinkmann Corporation is voluntarily participating
in an industry program to collect and recycle these batteries at
the end of their useful life, when taken out of service in the
United States or Canada. The RBRC® program provides a convenient alternative to placing used
trash or the municipal waste stream, which may be illegal in your area. Please call
Top Housing
Tabs
Lens
Battery
Compartment Lid
Battery
Top Housing