Ground Light Assembly

INSTR_Window Pane-SG.qxd 12/23/03 9:28 AM Page 5

Step 1

Attach the ground stake to a pointed connector. Push approximately 3" of the ground stake into the ground. If the ground is too hard, soak area with water to soften.

Step 2

Attach light head to ground stake adaptor by inserting tabs on adaptor into slots in bottom of light head. Twist adaptor clockwise to fasten.

Step 3

Insert light head into ground stake. The photocell light sensor should point away from other nighttime light sources.

Step 4

For optimum performance, it is best to charge the solar light for a FULL, SUNNY DAY. The light will turn on automatically at night. The Ni-Cd rechargeable battery provides increased brightness and stays on longer as it cycles over time (days and nights of charging and discharging). The more direct sunlight that the light receives during the day, the brighter and longer the light will stay on at night.