Echo PB-770 H/T specifications Assembly, A B D G G E H E I J C

ASSEMBLY PB-770 H/T

6.Assemble flexible pipe (B) to elbow (D) on blower. Position guide loop (G) on outside of flexible pipe (away from blower) and tighten clamp (A).

Note: A light lubricant may be used to ease assembly of flexible pipe to blower elbow.

7.Clip throttle cable into throttle cable guide loop (G).

8.Move handle (E) to desired position. Tighten knob (H) hand tight.

9.Assemble straight pipe (I) onto swivel pipe (C), until you feel light resistance. Do not force connection. Hold swivel pipe and turn straight pipe clockwise, engaging positive locking channels, until connection is firm. Do not force connection.

10.Assemble straight pipe with decal (J) to straight pipe (I) as in step 9.

Note: Blower use will eventually loosen pipe connections. Exclusive positive locking system allows pipes to be tightened. If loosening occurs, remove two straight pipes and install according to instructions 9 &10.

A B

D

G

G

E

H

E

I

J

C

16 X7531123904

© 4/2013 ECHO Inc.