Echo PB-770 H/T specifications Install Blower Pipes, Assembly

PB-770 H/T ASSEMBLY

8.Assemble straight pipe (J) onto swivel pipe (C), until you feel light resistance. Do not force connection. Hold swivel pipe and turn straight pipe clockwise, engaging positive locking channels, until connection is firm. Do not force connection.

9.Assemble straight pipe with decal (K) to straight pipe (J) as in step 8.

Note:

Blower use will eventually loosen pipe connections. Exclusive positive locking system allows pipes to be tightened. If loosening occurs, remove two straight pipes and install according to instructions 8 & 9.

PB-770 T

J

K

C

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

Install Blower Pipes

1.Place guide loop (G) across clamp, and turn until clip fully engages clamp band.

Note: Clamp with cable guide loop (G) fits elbow end of flexible pipe (B).

2.Assemble clamps (A) onto both ends of flexible pipe (B).

3.Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp (A).

Note: Hang handle freely from blower to assure throttle cable is not twisted before installing handle (E).

4.Loosen knob (H) on handle (E). Align notch in handle with tabs (F). Install onto swivel pipe (C) past long ridges in pipe.

5.Insert anti-static wire through flexible pipe (B).

GG

G B A C

A

E

H

C

F

X7531123904 15

© 4/2013 ECHO Inc.