Echo PB-770 H/T specifications Assembly, Install Blower Pipes/Stick Handle

ASSEMBLY PB-770 H/T

ASSEMBLY

PB-770 H

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

Install Blower Pipes/Stick Handle

1.Assemble clamps (A) onto both ends of flexible pipe (B).

2.Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp (A).

3.Insert anti-static wire through flexible pipe (B).

4.Assemble flexible pipe (B) to elbow (D) on blower and tighten clamp (A).

Note: A light lubricant may be used to ease assembly of flexible pipe to blower elbow.

5.Loosen wing nut (E). Align notches (G) in handle clamp with tabs (H).

6.Slide stick handle onto swivel pipe (C). Stick handle (F) should be angled away from operator.

7.Position stick handle (F) over metal plate on swivel pipe and adjust for comfortable operation. Tighten wing nut (E).

Note: Ground lead of stick handle must contact metal plate on swivel pipe.

14

A

C

B

B

D

A

B

F

C

E

G

H

X7531123904

© 4/2013 ECHO Inc.