Echo PB-770 H/T Starting Warm Engine, Stopping Engine, Purge Bulb, Recoil Starter, Throttle Lever

OPERATION PB-770 H/T

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke.

-PB-770 H

1.Throttle Lever

Move throttle position lever (A) to IDLE DETENT positions.

-PB-770 T

1.Throttle Position / Stop Switch Button

Slide Throttle Position / Stop Switch Button (A) back to idle position.

- PB-770 H and T

2.Purge Bulb

Pump purge bulb (D) until fuel is visible. Pump bulb an additional 4 or 5 times.

3.Recoil Starter

Pull recoil starter handle (E) and engine should start. Do not use choke (C)

Note: If engine does not start after 5 pulls, use cold start procedures.

Stopping Engine

-PB-770 H

1.Throttle Lever

Move throttle lever (A) to IDLE DETENT position and allow engine to return to idle before shutting off engine.

2.Throttle Lever

Move throttle lever (A) to "O" (Stop) position.

-PB-770 T

1.Throttle Position / Stop Switch Button

PB-770 H

A

PB-77- T

C

E

D

PB-770 H

A

PB-77- T

Release throttle trigger. Move Throttle Position / Stop Switch Button (A) forward to idle position and allow engine to return to idle before shutting off engine.

2.Throttle Position / Stop Switch Button

Move Throttle Position / Stop Switch Button (A) all the way forward to STOP position.

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.

20 X7531123904

© 4/2013 ECHO Inc.