Echo PB-770 H/T specifications Description

Models: PB-770 H/T

1 36
Download 36 pages 54.25 Kb
Page 12
Image 12
Manual background

DESCRIPTION

PB-770 H/T

 

 

1.SPARK PLUG - Provides spark to ignite fuel mixture.

2.SAFETY DECAL - Lists important safety precautions.

3.SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

4.FUEL TANK - Contains fuel and fuel filter.

5.FUEL TANK CAP - Covers and seals fuel tank.

6.RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

7.AIR CLEANER - Contains replaceable air filter element.

8.CHOKE - Move lever UP to close choke ( Manual background ) (starting position) and for emergency stopping. Move DOWN to open choke ( Manual background ) (run position).

9.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.

10.SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.

11.HANDLE - Used by operator to direct and control air flow.

12.COMBINATION THROTTLE POSITION / STOP SWITCH BUTTON - Controls engine speed and turns ignition on or off. Forward position - STOP. First detent position - IDLE. Move button back to increase speed, forward to decrease speed. Use Throttle Position Button to set and hold blower speed for continuous operation.

13.THROTTLE TRIGGER - Spring - loaded Throttle Trigger controls engine speed. Releasing Trigger returns engine to speed set by Throttle Position Stop Switch Button. Always release trigger and allow engine to return to idle before shutting off with Throttle Position Stop Switch Button. Use Throttle Trigger to vary blower speed settings for intermittent operation.

14.LOCKING KNOB - Allows operator to adjust handle position for optimum comfort and control.

15.BLOWER PIPES - Exclusive positive locking system.

16.FLEXIBLE PIPE - Allows for full range of movement.

12

X7531123904

© 4/2013 ECHO Inc.

Page 12
Image 12
Echo PB-770 H/T specifications Description