Section 2
2.4OPERATION CONSIDERATIONS (CONT'D)
3.To prevent tipping or loss of control, start and stop smoothly, avoid unnecessary turns and travel at reduced speed.
4.When using any attachment, never direct the discharge of material toward bystanders or allow anyone near the machine while in operation.
5.Before attempting to start the engine, with the operator in the seat, disengage power to the cutter deck, place the steering control levers in the neutral position and engage the parking brake.
6.If the mower discharge ever plugs, shut off the engine, remove the ignition key, and wait for all movement to stop before removing the obstruction.
WARNING:
DO NOT use your hand to dislodge the clogged discharge chute. Use a stick or other device to remove clogged material.
7.Be alert for holes, rocks, roots and other hidden hazards in the terrain. Keep away from any dropoff. Beware of overhead obstructions (low limbs, etc.) and underground obstacles (sprinklers, pipes, tree roots, etc.). Cautiously enter a new area. Be alert for hidden hazards.
8.Disengage power to cutter deck before backing up. Do not mow in reverse unless absolutely necessary and then only after observation of the entire area behind the mower.
9.DO NOT turn sharply. Use care when backing up.
10.Disengage power to cutter deck before crossing roads, walks or gravel drives.
11.Mow only in daylight or good artificial light.
12.NEVER raise the deck with the blades engaged.
13.Take all possible precautions when leaving the machine unattended, such as disengaging the mower, lowering the attachments, setting the parking brake, stopping the engine, and removing the key.
14.Disengage power to the attachments when transporting or when not in use.
15.The machine and attachments should be stopped and inspected for damage after striking a foreign object, and damage should be repaired before restarting and operating the machine.
CAUTION:
DO NOT touch the engine or the muffler while the engine is running or immediately after stopping. These areas may be hot enough to cause a burn.
WARNING:
DO NOT run the engine inside a building or a confined area without proper ventilation. Exhaust fumes are hazardous and could cause death.
16.Keep hands and feet away from cutter blades and moving parts. Contact can injure.
17.Use care when loading or unloading the machine onto a trailer or truck.
18.Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.
6