ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.
1. Engine Handbook.
2. Warranty Reg. Card.
3. Grassbag.
4. Charger (412)
5. Ignition Key (412)
To prevent accidents cut off the long ribbon attached to the grass- bag and discard.
Handlebar |
Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Move the engine stop lever away from the engine to avoid damage and unfold the handlebar to the operating position. Make sure the knobs are assembled to the outside of the handlebar and tighten to secure in position.
1C411A011 | Take care to ensure that the control cables do not become snagged at |
| the pivot point. |
Grassbag Attachment
Raise the rear deflector, lower the grassbag through the handlebar and hook in position. Lower the deflector to rest on the grassbag
1.10